20 Most Recent
IBM ThinkPad R50e Notebook Questions & Answers
Dear Sir.
R50e"C MOS battery location is Sided of RAM.
IBM ThinkPad...
•
Answered
on Nov 14, 2020
You can only change the region code up to 4 times then it locks on the last change.
There are some firmware upgrades that can change the drive to region free, if you can screw it up or put in the wrong frmware upgrade then the DVD drive will be a piece on junk.
I suggest you install a region free software that will allow you to play any region DVDs.
Go to
www.dvdidle.com to get their Region-Free software, it is not very expensive.
IBM ThinkPad...
•
Answered
on May 07, 2020
If you need to reset it, you can get a recovery disk from IBM Lenovo which will be much cheaper than getting a new copy of Windows. When you call up IBM, make sure you keep your serial no handy.
IBM ThinkPad...
•
Answered
on Sep 21, 2017
If you have low memory disk, try to check your cpacity. To do this, click Start > then right click Computer then click Properties. You will check your RAM if it is 512MB, 1GB or 2GB. Then click Start then click My Computer. Then right click Local Disc C then click Properties. You will check the total memory space available. If the free space is very little already, try to remove unnecessary programs such as games... Restrart the pc and check if your space is still low...
IBM ThinkPad...
•
Answered
on Oct 31, 2014
turn off the keylock on boot- this is an option in the bios. also you might be able to use the fn key and turn it off manually
IBM ThinkPad...
•
Answered
on Aug 14, 2014
Turn laptop over pull the 2 sliders apart battry should slid out
IBM ThinkPad...
•
Answered
on Jul 23, 2014
If you have recently installed any new software, check to see if it is properly installed. Check for updated drivers on the manufacturer's website.
Try going back a rev.
IBM ThinkPad...
•
Answered
on Apr 13, 2014
hold down the fn key on the keyboard and the press the lighting button should be at the top of keyboard!!!!
IBM ThinkPad...
•
Answered
on Jan 13, 2014
look at the F-1 thru F-!2 keys on top of keyboard if one has a mouse on it press it and the Fn key (bottom left on keyboard) at the same time to restart the mouse pad if this doesn't work go to control panel hardware devices mouse go to mose properties be sure it is set to Enabled
IBM ThinkPad...
•
Answered
on Jan 02, 2014
Not finding what you are looking for?
