20 Most Recent Smeg S1100MFX5 Electric Single Oven - Page 4 Questions & Answers

If it’s just 2 wires, it most likely doesn’t matter. Probably the relay on board that sends power to the non working element is bad.

there are only 2 connections. one wire should be a little shorted than the other pull them back out and connect element

Similarly, as any craftsman needs to choose what medium to utilize, woodworkers must choose what wood to work with. The appearance, shading, cost, planned utilize, workability, and maturing conduct are for the most part contemplations. In any case, so is a wood's paintability or capacity to take a stain. In the event that recoloring, you need to know how the wood grain will show and how the wood shading influences the shade of the stain. Here's a snappy guide from the Pros who've addressed the inquiry, "What's the best wood for painted cupboards?"

either a bad connection on the element terminals or faulty element

Hi there must be a button or switch on the panel to turn it off

The stove should have a safety valve that needs to be removed upon first use , remove that then open the gas and then iginite pilot flame.

appliance repair shops or online search for replacement transfer decals or replacement panel

There is a thermostat that controls the fan, until the oven cools to a preset level the fan will continue to run to cool things down.

ok here is the manual for the smeg ovens User manuals

goto (http://www.smeg.com/) click on services