20 Most Recent GE (74896) Clock Radio - Page 4 Questions & Answers

0helpful
1answer

What r the codes for ge universal remote for kirsh home theater system model k3

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
1/8/2017 1:48:27 PM • GE Audio Players... • Answered on Jan 08, 2017
0helpful
1answer

A universal GE remote will not work with my TX-8222 receiver. What am I doing wrong?

What codes have you tried?
1/8/2017 7:14:47 AM • GE Audio Players... • Answered on Jan 08, 2017
0answers
0helpful
1answer

Codes for setting up a universal remote

Sorry. GE remote control have no set-up codes to this system. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
8/11/2016 11:33:03 AM • GE Audio Players... • Answered on Aug 11, 2016
0helpful
1answer

GE model C1515 AM/FM radio, it humms & clock doesn't work. What can I do?

Chuck it - not worth repair.
7/29/2016 10:10:47 PM • GE Audio Players... • Answered on Jul 29, 2016
0helpful
1answer

I have a ge gtd 120 home theatre surround sound.for some reason, my volume is stuck on one level.. I haven't had a remote for it for a while, just used the knob to adjust the volume.someone plz help!

Unless the system has some kind of automatic volume control on it, that can only be adjusted by the remote. I think you might have a faulty volume/tone control circuit. These days many amps have a single IC that will control the volume. If that goes the volume can get stuck on one level. Since the control knob you are turning is simply sending a signal to that IC. So if the IC has died the signal is not being received. If you want to repair it yourself just follow the wires back to the board from the volume control. You should see a large multi pin black box that if your lucky is marked on the board volume control.
6/12/2016 11:26:42 PM • GE Audio Players... • Answered on Jun 12, 2016
0helpful
1answer

Need a bulb for a ge am\fm radio with cassette

Look in your phone book for places that sell bulbs. Hardware stores, ect take the bulb in to be matched.
11/30/2015 10:45:36 PM • GE Audio Players... • Answered on Nov 30, 2015
0helpful
1answer

Tape deck(component)SUDDENLY plays tapes slower - wouldn't a faulty belt gradually play tapes slower?

It could be a lose belt but also a motor is decaying or the capstan bearing has no oil in it. Many things can cause this problem.
8/2/2015 7:58:21 PM • GE Audio Players... • Answered on Aug 02, 2015
0answers
0helpful
1answer

GE 105020a stack system has a loud hum in both speakers when the unit is OFF. How do I fix this?

It seems is not the speakers. I think is the sound card of your device.
5/13/2015 4:34:44 PM • GE Audio Players... • Answered on May 13, 2015
Not finding what you are looking for?
GE (74896) Clock Radio Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top GE Audio Players & Recorders Experts

Rob Hill
Rob Hill

Level 3 Expert

1480 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66965 Answers

Are you a GE Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Audio Players & Recorders

  • GE Audio Players & Recorders

Most Popular Question

set time alarm ge auto clock set radio

  • Audio Players & Recorders
Loading...