20 Most Recent Smeg A2.2 Gas Kitchen Range - Page 8 Questions & Answers

Check further down on the site for filters. They have a 800# so you can confirm. https://www.kitchensource.com/range-hoods/fu-buf-021.htm

Rhoda, Check this site... https://www.appliancepartspros.com/repair-help/general-electric-range-rgb524pea6wh-repair/rgb524pea6wh-gas-igniter-glows-but-will-not-light.html Also here.... https://www.repairclinic.com/Shop-For-Parts/b95/Hotpoint-Parts?query=RGB524PEA6WH There are 800#s to talk with a tech to insure your'e getting the right product to fix your problem. And videos to help you replace the product. Best to you.

While you didnt say if your oven is heated by gas or electric i am going to assume its gas and the cause of that sputtering sound is due to weak ingiter that is not fully opening the gas valve yet its just opening it a wee bit cauing it to basically starve for gas flow and sputtering all the time the gas is flowing. By replacing the igniter the gas will flow properly and stong and thusly the noise will cease and it will heat quickly.

If its electric heated let me know and i will figure why its sputtering

Miswired element. Faulty element. Faulty thermostat. Components normally fail and trip breakers was soon as power is connected. Yours has something happening after 10 minutes as the stove is heating up and reaching the set temperature. Google make model wiring schematic ..

What is the model number of the unit?

I just replaced the switch just yesterday.First remove the glass panel by pushing back the 2 black clips at the top end,then remove 2 silver screws at the top and 3 at the bottom also remove 2 black screws behind side panels on the top. Now push side panels slightly up and forward and it fill fall forward and now replace the switch.

If you were looking for a way to earn some extra income every week... Look no more!!!! Here is a great opportunity for everyone to make $95/per hour by working in your free time on your computer from home... I've been doing this for 6 months now and last month I earned my first five-figure paycheck ever!!!! Learn more about it on the following link...www.cash.hiring9.com

Could be either, but test the continuity of the heating elements with a multimeter first.

Hello, One night, my (Omega) range hood also blew with a snap, crackle and pop (flash) also after pressing the light button. The PCB is charred behind the light switch/toggle thingy. The PCB is a replaceable part, but out of interest I am curious to learn if I can piggyback the light onto the fan switch. "Anonymous", at first I thought I may have authored what turned out to be your post. Many thanks.

Hi you can try here http://www.thewebpole.com/twp/domain-web-hosting/ for reliable hosting service...

That is normally caused by the holes in the flame spreaders being full of cooking residue. Put them all except one in a pot of cold water with a teaspoon or washing up liquid, Bring very slowly to a simmer. Watch it because it will immediately want to boil over. Remove from the heat and drop the remaining spreader in. Leave them to cool. Scrub them with a plastic post brush, making sure the holes are clean all the way through. Rinse and leave to dry. Or your gas has been turned off? Does the oven work?

To clean stains on the Russell Hobbs 2 Plate Mini, you can follow these steps:

1. Turn off and unplug the mini stove to ensure your safety.
2. Allow the plates to cool down completely before cleaning.
3. Make a solution of equal parts of white vinegar and water in a spray bottle.
4. Spray the stained areas with the vinegar and water solution.
5. Let the solution sit for a few minutes to break down the stain.
6. Wipe the plates with a soft cloth or sponge, applying gentle pressure.
7. For stubborn stains, sprinkle baking soda on the plates and scrub gently with a sponge or brush.
8. Wipe the plates clean with a damp cloth and let them air dry completely before using the mini stove again.

Note: Avoid using abrasive cleaners or scrubbers as they may scratch the surface of the plates. Also, avoid using harsh chemicals that may damage the surface or the heating elements of the mini stove.

The Westinghouse has no power sockets on the side of the cooker!

Not very good at reading wiring diagrams, but hopefully someone else on Fixya can assist you. Here's a site I found hopefully someone can chime in. Best to you https://www.buyspares.com/kenwood/cooker-oven/ck408-c9t0kw018x/catalogue.pl?path=441691%2C261565&model_ref=2588765&illustration_ref=2313971

Hi, you've taken the correct steps to start. Please attempt to slide some parts of the magic chef to the side. Also, look on the bottom of the device. If all else fails, please call magic chef to find out where the cord might be plugged in. Thank you.

Can you please send me the wire diagram by color to connect to wire board panel like red, grey white etc. for gas stove JGBP28BEJ1CT gas stove I bought a replacement but forgot to take a picture

Question edited for a lot more clarity. So few words, so many mistakes and yourspacebarisbroken! Please proof read before you post! Probably needs a new glow plug. https://www.google.com/search?q=efel+oil+stove+won%27t+light+up

To replace the broken light on your Broan Allure range hood, you will need to follow these steps:

1. Turn off the power to the range hood by unplugging it or turning off the circuit breaker.
2. Remove the filters by gently pulling them down and then out of the range hood.
3. Locate the light cover and remove it by pulling it towards you.
4. Use a screwdriver to remove the screws that are holding the light assembly in place.
5. Carefully pull the light assembly out of the range hood.
6. Replace the broken light bulb and ensure that it is securely in place.
7. Reinsert the light assembly into the range hood and tighten the screws.
8. Reattach the light cover by pushing it back into place.
9. Replace the filters by pushing them back up into the range hood.
10. Turn on the power to the range hood and test the new light to ensure it is working properly.

Note: If the light assembly is wobbly, you may need to tighten the screws that hold it in place or replace any damaged parts.

Contact some technicians in your local area directly. That will be the easiest way to get prices.