20 Most Recent
Questions & Answers
Code 56 error
You have a Head Error-Head Drive/Emitter Failure.
Your going to need to check your head drive belt, being that the printer is so old the belts go bad and start to crack and turn into a tar sub. Also make sure to clean your rails, over time they build up dirt and oil and need to be cleaned off.
I HAVE A 4224 PRINTER FOR SALE. WHO COULD I
Are you looking to upgrade? I can take yours as an exchange or if you are interested i can repair the one that you have like new.
Please let me know. I carry parts and printers in stock refurbished with a 30/day warranty.
Midrange Repair and Parts
Alsip IL 60803
Error 01 is End of Form, Make sure u have paper installed.
The sensor that is at the bottom left that you feed paper thru is were this error is generated. Make sure it is aligned and working.
Also clean with wet paper towel slide in and out
You can also run a Test 851. to see if the sensor is open(1) and closed(0). also check the connection on the board to see if it still connected.
I can go into level 2 support if more help is needed.
I need hep for my printer
IBM 4224 Printer G111 (172.26.131.26) does not print. Possibly bad card.
How to get a manual to show how to do this?
IBM 4224 Shuts off after warm up
4224 were notorious for poor connections between the control cards and the motherboard. Opening the printer and reseating all the cards solves a multitude of problems. Try it.
Not finding what you are looking for?