20 Most Recent Motorola Mobility HS850 Consumer Headset - Page 4 Questions & Answers

Hold the main button in until you hear one beep. Generally like a 2 second hold. To turn off, hold longer, generally a 4 second hold. You will hear multiple beeps on power off.

Here is the link for the USB Drivers:
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

Here is the link for the Motorola Phone Tools Utility:
http://lfiles3.brothersoft.com/internet/mobile/Motorola_mobile_phone_tools4.5.1.zip

Please give me a big thumbs up when you rate my answer. Thanks!

0000

Try using 0000 as it's the basic code for every bluetooth unless manually change. That is the factory default.

most passkeys are generally 0000

close flap (off mode) hold down the "on" function button until the blue light comes on. once it comes on open the flap.. the blue light should stay on. you should already have your phone set for pairing. if your phone ask for a password. its generally 0000..but heres a link to the guide..http://direct.motorola.com/hellomoto/motosupport/source/generalpairinginstructions.asp?p_headset=742

Heres the Motorola webiste.. instructions for pairing earpiece with phone :)
http://direct.motorola.com/hellomoto/motosupport/source/generalpairinginstructions.asp?p_headset=742

Passkey 0000 worked for pairing my Motorola HS850 and my Blackberry 8800. Thanks!

power off the bluetooth device and start the search on your ipod then turn the bluetooth device on. This will reset it sometimes.

Put the headset in PAIRING mode, if it has been paired with another phone, it will not accept a new pairing or another phone until you put it in pairing mode again. Press the button until the LED gets steadily ON, search the headset and pair it with the new phone. It only accepts one paired phone at a time.

Put it on pairing mode by pressing the button until the LED keeps lit, then search and pair from the phone. The code is 0000 (Four zeros).

0000

try 0000 or 9999 or 1234

unit needs to be replaced with new one go to www.n1wireless.com to get replacement cheap

Passcode is four zeros 0000. Heres the manual
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000072060.pdf

Hello! I had this exact same headset before I got my current Jawbone - and I had the same problem after about 8 months of pretty heavy usage. I did some searching and found a fix that worked, but it involves taking the unit apart, but is otherwise quite simple (and worth it, IMO) :)

Start by removing the plastic cover that surrounds the main button on the front. This can be done by firmly holding the headset and gently prying up on the lanyard loop (as indicated by the arrow) - this plastic cover is simply held on with double sided adhesive. Once you have it removed, you will see a small Torx head screw (size is T5). Remove the screw and the headset can be pulled apart. NOTE: Do this over a table or tray so that if you do happen to drop the button, or the spring under it - you can find it again. :)
Now - my problem was the spring under the button - and I use the term spring very loosely here - it was actually just a piece of foil and tape - was sitting on the board, and not actually working to activate the button. If you simply reset that tape so it doesn't contact the board - it should work again. At least mine did.

I hope this helps and good luck! Thanks for using FixYa!

i found mine bu googeling the model number. motorola has these online.

try pluging charger in 5 sec, unplug it, repeat this 3 times. this reset to default. hope helps.

How to pair a Motorola HS850 bluetooth headset How to place a Motorola HS 850 bluetooth headset into paring mode:

1. Close the boom to turn the unit off.
2. Hold down the call button until the blue light comes on.
3. While holding down the call button, swing the boom open.

The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.