20 Most Recent Panasonic Palmcam PV-DC1080 Digital Camera - Page 6 Questions & Answers

Since Amazon has them for about $60, I should just replace it - repair will cost more.

See if the electronics can be reset so you have access to a menu for languages. If it cannot be reset or there is no menu for language then you are SOL.

There is an issue with the camera focus circuit in lens. That is why it is ok when you go into playback mode but negative when the lens is involved.

Here you are Rick. 2results for Panasonic PNLC1029 battery charger

Bit of a long shot - have you tried the Panasonic site ?

Hi, prof - what exactly are your qualifications in ? Presumably not ensuring that you are attempting to contact the appropriate website - Fixya only offers advice on damaged or defective equipment. Please contact the original vendor and regale him with your sorry tale of woe.

Look on Google for a free download

Whichever gives you the most pleasing aesthetic results. Generally landscapes are considered better in, oddly enough, 'landscape' format. Why not read a book on basic photography from your local library ?

Very useful - read it and familiarise yourself with the equipment

As it arrived in a broken state, return it for a full refund.

You need to go to the Panasonic support site and look.

Try posting this statement in a forum dealing with home entertainment equipment - this one is for cameras.

change the cable orderonline dont repair it

Resetting by 'Software' Resetting to the Factory Default Settings from the interface:

1. Go to the interface of your camera by typing in the camera's IP address in the browser. Example: http://192.168.1.253/
2. Click Setup, Maintenance, Default Reset, Reset to default and then click Execute.

Resetting by 'Hardware' Resetting to the Factory Default Settings using the Control button:

1. Disconnect the 'DC IN' cable from the camera.
2. Hold down the 'Initial Set' button.
3. Reconnect the power adapter using the 'DC IN' jack while holding down the 'Initial Set' button. Release the 'Initial Set' button after 5 seconds. (The reset could take up to 180 seconds)
4. When the 'Status' indicator changes to green, the process is completed and the camera had a Factory Default Reset.

http://electronicshelponline.blogspot.com/