20 Most Recent
Sony DSC-T7 Digital Camera - Page 3 Questions & Answers
DSC-T7 : Blurred images ?
I don't own a T7,but I have the P150 and S40. All these small Sony digicams have something in common;Sony uses 1/40 as the default flash shutter speed in low light conditions,while other makers use 1/60.You are more likely to get a blurry picture compared to other digicams you have previously used,unless you hold the camera steady (two hands).
The other thing about these cameras is their lack of weight, coming in at a mere 134 g/4.7 oz. Light weight means you must hold the camera steady (two hands) or risk camera movement when you press the shutter. Again, the tendency with a small,light weight camera is to hold it with one hand while you take a picture,this leads to blurry pictures.
The review for this camera is positive; a "Dave's Pick." - Just remember the flash range is only 5ft / 1.6m.
http://www.imaging-resource.com/PRODS/T7/T7A.HTM
Dsc-t7
Hi there,
There is one solution, give a close look at camera board at front side, you will find a tiny/ micro switch there, this was being pressed by that little metal lost part, now cut a small piece of adhasiv tape and paste it over that switch to make it enable. Fix the front cover and push power button, camera will work.
2nd solution is you need "complete front cover" because little metal part is not available individually.
Out of focus
Hi,
Focus motor in lens assembly of camera is jammed and needs to replaced, you can get complete lens assembly from Sony if you wish to repair it at your own. Error code 61-10 shows focus problem in lens mechanism.
How to Remove the Lens Cover on a Sony DSC-T7
It is only six screws, and you have to GENTLY wiggly the front cover off....Start at the bottom, and wiggle side to side to get it unattached at the top of the panel. I just got mine off. I'm having black screen problems....
LCD screen went black
No. It is likely that there is still water in it. It's very important that you take the battery out and do not try to use it. Take it to a repair shop and be SURE to tell them it had water in it so they can take the appropriate steps to clean and protect it.
Re: CCD Sensor
Base on my experience with Sony CCD's, if it was the CCD, you would have NO picture. Odds are that the problem is the auto-focus circuit or the focus motor/gear. Either way it's highly unlikely that a shop could fix it, let alone trying it yourself. It's usually easier to just replace the Lens Block, but unfortunately, that usually runs around $150....for the PART.
How to open casing
Dont do it...Whats the problem...if your under warranty or a service plan let them take care of it...
USB
What operating system is your computer
Sony DSC - T7 green screen
This is a component failure
If the camera is less than a year old return it to the seller.
If older than a year but a current model contact Sony who may replace it free of charge.
There have been recall on some models because of component malfunction
Not powering on???
To reset, take battery out, hold on power button for 15 seconds, let go afterwards, replace battery
Turn on the camera, cover lens is closed even though i already pull it down
if you open up your casing you will find that almost dead center on the front PCB, just to the right of the battery at the top of the empty battery area there is a box. possibly with some plastic fragment that is broken off. if you touch inside this box w/ something conductive it will think the lens is open. You can either fix this area or permanently solder it so it thinks it is always open. You can still turn it off using the button on the side of the camera
Lens Cover Closed
the switch inside that activates the camera is probably loose, or worse, broken.
And I have a project due tomorrow!!!
I would suspect either the cable connecting the camera and TV or the TV itself.
What type of TV are you plugging into and what type of inputs are you connecting to?
DSC-T7 Power Problems
The only and the only solution is to get the replacement as this seems to be a defect in the camera and you should get it change immediately.
T7 video
Hello
The zoom does not work on the T7 while you video, you have to zoom first and then start to video, then it is fixed at that zoom setting.
Other than that, the video is pretty good, I have taken video clips up to about 5mins (but in theory you can go up to the limit of the mem card and battery - battery from full is about 40 mins from the top of my head and my 512mb mem card could do about 30 mins on best quality)
The sound is good, and the picture is pretty good, but obviously there is no 'flash' function, so you are looking at daytime or well lit video only.
One thing is that you do need a steady hand, because the unit is so small (a great benefit most of the time) you do get a fair amount of camera shake if you do not have a very steady hand... usually the morning after the night before for me! :o)
I have been pretty happy with it a a fun video accessory, but if you want the camera for that as a main use, I would look around.
Sasson
Small dent on lens cover
Put a sticker over it or a little stripe or somthing. The cover looks like its connected on the inside of the front case. Contact sony maybe they will send you a little slony logo sticker? you know how their logo is little dots? maybe you can find one on e-bay or somthing. Stickers cover everything :P
DSC-T7 Magnify Mode
Hello,
Don't mix magnifier mode and expanded focus mode.
Magnifier mode is simply a short AF range operating mode, like a kinda super-macro. Whether you selected mag/macro/normal, the camera operates always same except that the focussing range limits are changed accordingly by the S/W. The lens itself is capable of focussing from 1cm to infinity anyway.
Expanded focus is used on some still and video cameras to assit manual focus because the LCD's resolution is lower than the CCD's. It can be seen as a workaround for the lack of optical reflex viewfinder (Sony cams ar not dSLRs, including HDR-FX1!). So the center area of the pic is "digitally zoomed" to make sure you can adjust a sharp focus of the point of interest in your frame. However it has nothing to do with macro shooting, and works at any distance within the lenses focussing range.
Hope having helped
Confused about Resolution Sony DSC-T7
2.2 MB is the size of the file on your hard disk. Being a .jpg, it is a compressed file. The file size does not reflect the size of the image stored inside the .jpg. Yes, the size sounds about right. It will increase or decrease depending on how much detail there is in the picture. If, for instance, your picture is made up of nothing but uninterrupted blue sky, the disk file will be quite small - as the .jpg does not need to store much information (the more repetitive information, the smaller the file). On the other hand, if your photo consists entirely of nothing but blades of grass, the disk file will be comparatively large.
When you see "DPI", that refers to print resolution. So, since you're not printing, but rather, viewing onscreen, Photoshop "assumes" a convenient "screen resolution", as though you printed on the screen (don't ask!). If you look at the other settings, you'll note that Photoshop also thinks your photo is 36" wide!!!
You adjust the DPI (or photoshop will) when you print. Till then, it doesn't mean much.
Let me give you an idea of your image's possible DPIs.
Assume you really want to print a 36" photo:
2592/36" = 72 DPI
If you make the picture 12" wide:
2592/12" = 216DPI
At 10":
2592/10" = 259.2 DPI
At 8"
2592/8" = 324 DPI
How do you get my photos above 200 DPI?
By printing the picture small enough, less than 12.96" on the wider side.
See calculations above.
The resolution at which you shot the image (2592X1944), will not cause blurriness.
As for the cause? There could be any number.
Was the subject moving?
Were you?
Did you shake the camera while shooting?
Is your shutter speed too slow?
Should you have been using flash?
Is the camera autofocusing correctly?
Are you waiting for the autofocus to lock before pushing the shutter the rest of the way?
Etc.
Hope this helps somewhat...
DSC-T7 Blurriness
Try this test:
Mount the camera on a tripod or set it on a secure base and use the self timer to trip the shutter. Doing this will totally eliminate any possibility of camera shake causing blurriness.
If the picture is still blurred then there might be a problem with the AF but if it isn't blurred then the problem is either camera shake OR subject movement (or both).
Not finding what you are looking for?