when i turn on my camera, i see a bright white screen, the lens still opens, i can still take pictures and view on computer, but NOTHING is on my screen. i tried playing with buttons over and over, i hear beeps, like its going through all the menus, but i still cant see anyything, from what i can tell everything else seems to be working. help!
Posted by beverly... on
If the LCD is all white when this occurs it is the LCD that is at fault. Verify this by shooting a couple photos, if the photos look good when viewed on a computer, the CCD is not at fault. The LCD module has had problems with the harness that connects it rubbing againts the metal frame of the camera and causing similar problems. Hope this helps you. Joe Weibel customelectronics.org
Posted on Feb 16, 2007
Well my camera was working ok but suddenly one day it told me to turn the power off and on again...im kinda frustrated with this...please help!!!
Posted by hippix on
easy! charge the battery.With power off,whack the base of the camera against the palm of your hand four or five times.wait five minutes,turn camera on and whack the side of the camera nearest the lens against the palm of your hand.then whack the base again and the lens should pop out.Worked for me!!!
Posted on Feb 02, 2008
how can i get the E:91:01 out of the screen?
Posted by libay on
No Problem! Press MENU end go to setup, choose initialize to initialize the cam and put all the configs! finish! your problem is over.
Sorry for my english because i'm from Brazil ^^
Posted on Sep 08, 2008
how to reset please
Posted by kylesa2000 on
solution to reset---
press all 3 buttons on the back of the camera(MENU; Display/LCD on/off; Image size/Delete) simultaneously while turning on the camera.
Posted on Feb 26, 2009
my cybershot camera has no display on lcd screen only display white screen what could be the cause of this?
Posted by clans... on
I fixed the camera myself as follows:
1. Hold camera firmly in left hand
2. Smartly rap front of camera with knuckles of right hand on the "Cyber-shot" logo.
It worked, now the LCD is working again for free.
Posted on Aug 01, 2010
I turned my camera on and the screen is bright white! I can still view my pics on the comp. but how do I get the screen back. Please help.
Posted by Sbrooke on
I CAN'T BELIEVE THIS ACTUALLY WORKED!!! At first, when I tapped the Sony Logo, the camera shut off. But then, suddenly the screen turned on and I realized that it was stuck in the time section of the menu. That's why I couldn't take pictures!
WOW!! Thank you for the incredible cost-saving solution! I was about to plunk down $120 for a repair!
Posted on Dec 27, 2007
on my sony cybershot, the camera's LCD does not work. When I turn it on, all that appears on the screen is a white image, and can't not see any of the pictures I have taken. I can only take pictures and see them on the computer, but not on the LCD, Again all I see is a White Image on the LCD screen. Please Help, Jay
Posted by Jay Jay on
Hitting the Cyber Shot logo on the front really works - ye legends!!!
Posted on Aug 22, 2007
I get this message: "640(Fine) is not available" when I set my camera on the video recording option. Seems to be a memory problem. What does this mean?
Posted by yogagye on
i had the exact same problem!! like when u turned it to the video section, it said 640(Fine) rightt?
all i had to do was restart my camera with the chip in it.. for me it went back to normal! hope this helps
Posted on Mar 17, 2009
display reads usb mode mass storage usb memory stick what does this mean?
Posted by kwalker48 on
it means that your camera is set to have the memorystick detected when connected to a computer. ( camera have options to have memorystick or internal memory detected by computer)
Posted on Sep 11, 2010
Memory Stick error c:13:01
My old 512 MB memory stick is working fine. However, recently I brought a 2 GB memory stick and when I put it inside, the camera (Sony DSC S40 cyber shot) shows:
MEMORY STICK ERROR C:13:01
Posted by Anonymous... on
Is your new 2GB memory stick is original from Sony or after market? some of them will not detect in CAM because the contact on MS were not touched iside the slot of CAM
Reinsert your 512 MB MS if it work fine then change your 2MB MS
Posted on Nov 30, 2008
569 questions posted
Usually answered in minutes!