Inland ProHT Bluetooth Headset Red - Page 9 - Answered Questions & Fixed issues
Does anyone know why a Bearfoot 3 cb amplifier is not working ?
It obviously works, so it is NOT a fuse. The most likely cause is a poor antenna connection. This happens often. Unscrew the antenna. Use a continuity meter to check check each connector. Such as the one that screws into the radio, if the continuity meter "beeps" the connector is "grounded" and was installed improperly. Do not use that antenna until you fix it, you could blow the transmitter by using a "grounded" connector. Test it exactly the same way without the antenna attached. If you are not used to installing connectors, you could easily go through 2-6 before you get the hang of them.
on Apr 05, 2019
Unpairing a used momentum wireless camera
On the back there is a reset button. Hold it until the light in front turns solid red. Then it will be reset and within about 2 minutes a ladies voice loudly will say ready to pair, and will keep saying that every two minutes until you are successful or give up after a hour or so of trying every possibly way to get it to connect... Though the only pictures ive seen online of these cameras working are when they are linked to Iphones. 0 androids has it worked that I noticed.
Here is the link from momentum on configuring:
on Mar 24, 2019
How do I program my Baofeng UV-5RTP to automatically show the PTT-ID when keyed up and transmitting?
If you want the radio to broadcast your call automatically, I don't think I can help you or that the radio can do that.
However, if you want your name or callsign to show up on the screen, I can give you a solution... sort of.
You could program an alternate channel (A/B) that you never use, with your name or what ever.
In channel mode push menu and push up/down arrows or rotate knob until you find menue 26. In that menue you can program one letter at a time and put in whatever you want.
Or you can program a name in that nobody can change or tamper with unless they use computer software by using a chirp cable. Be careful to get a good cable some of the really cheap ones don't work and a few can even break the radio. There is a special box in the computer software where you can type in the welcom message that comes up when you turn the raio on.https://youtu.be/pUv92tJk_8s?t=717 this video shows the screen. Where it says the radio name under "power on message" you just delete the text and type whatever you want.
on Mar 17, 2019
Not finding what you are looking for?