Inland ProHT Bluetooth Headset Red - Page 8 - Answered Questions & Fixed issues


The most common codes are 0000 or 1234. Try those. newer devices do not require a code.

Radio... | Answered on Apr 08, 2019 | 149 views


If the bluetooth you are referring to is a bluetooth earbud, the batteries may be dead. You may need to buy a new earbud.

Radio... | Answered on Apr 08, 2019 | 155 views


Read the manual on your stereo. It should have information on how to pair bluetooth to help.

Radio... | Answered on Apr 08, 2019 | 151 views


That is a complicated question. Are you wanting to change the transmitter bluetooth module or the receiving one (usually an earbud or headphone.). Basically to change those settings you will need to connect and FDDI to UART module to your bluetooth module at the RX and TX pins and connect the FDDI to UART usb port to your computer usb port, then open up a terminal program, connect to the Bluetooth module via the FDDI/UART module. A terminal program such as CoolTerm can help you do that. You might also read bluetooth module information on SparkFun for more help.

Radio... | Answered on Apr 08, 2019 | 148 views


Try going to another location. If the batteries are still on and your old headset is nearby, it may be blocking your device from "seeing" the new headset because it is connected to your old headset which is lost but near by.

Radio... | Answered on Apr 08, 2019 | 150 views


You will need to tell us more. What model radios are you using? Can you hear others talking but not your friend with the other radio? If you can hear other talking, the problem my be a defective transmit circuit on the friends radio. If you can not hear any one, you may a a defective receiver or broken antenna. Can the other person hear you?

Radio... | Answered on Apr 08, 2019 | 136 views


It sounds like the batteries are dead. If that is the case, you will need to replace the batteries. Is that possible with your headset or are they built in? The other thing that may be happening is your charger is dead. Try using a different charger and see if the headset charges. Lastly, your charge cable may be defective and needs to be replaced.

Radio... | Answered on Apr 08, 2019 | 134 views


The static tells me that your audio chip is working, but the stages ahead of that are not feeding a signal to the audio amplifier. The intermittent receive sounds like a bad antenna connection, or bad contacts on your transmit - receive circuits. I don't know the Cobra 29 LXBT circuitry, but likely a relay is switching between transmit and receive when you press the mic key. You could try connecting your antenna to the pins on the relay that carry the rf signal to the receiver circuitry. If you suddenly starting picking up signals, you know the switch is the problem, as you have by passed the switch momentarily. Don't try to transmit in this condition.

Radio... | Answered on Apr 08, 2019 | 138 views


Often the yellow wire is for the clock to keep the clock running even if the radio is turned off. It is not meant to power the entire radio. The yellow wire is usually always on even if you turn off the key switch. You also need to have a ground or negative terminal connected to the radio, and also a 12 volt positive wire that is switched on and off by your key switch. The color of this wire is often red, but could be other colors depending on your vehicle.

Radio... | Answered on Apr 08, 2019 | 148 views


Yes!

Radio... | Answered on Apr 08, 2019 | 120 views


Possibly a walkie talkie button according to the FIXYA question below:

http://www.fixya.com/support/t12504924-mon_mean_walkie_talkie

Radio... | Answered on Apr 07, 2019 | 127 views


'tis better to give than receive...

Radio... | Answered on Apr 07, 2019 | 111 views


How to reset my Whistler ws1010

Radio... | Answered on Nov 09, 2019 | 1,675 views


hi,
the transmitter works only on the air band.
it will not work on the navigation band,
regards,
dan

https://www.rylwy.com/carbon-antenna

Radio... | Answered on Mar 31, 2019 | 120 views


It is an OLD scanner. New digital frequencies are not available to this scanner. The good news, though, is that all Uniden/Bearcat scanners in the 14X series are nearly identical in features and operation, so you can follow the link below to download/print the manual for the BC148XLT:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf

You need adobe reader to read the content.

Radio... | Answered on Mar 30, 2019 | 122 views


I have only done the UV5 series but I believe it is the same procedure. If using chirp, install the drivers from Baofeng that were with the programming cable,. then install Chirp. Even if it doesn't show complete go ahead and open Chirp. After that, the updates for chirp will install OK.

Radio... | Answered on Mar 29, 2019 | 133 views


Verify the offset is correct. Was it programmed with chirp or another software. Transmit may have been disabled or programmed out of band.

Radio... | Answered on Mar 29, 2019 | 283 views


Typically you press the button on the front that is marked T/A. It means "talk around" or talk without the towers. It is simplex. Hopefully no one changed that buttons action.

Radio... | Answered on Mar 28, 2019 | 125 views


Your question is not very specific. Do you have a programming cable? Can you access the internet on a laptop with a USB port for that cable? You CANNOT program radios from a phone or tablet. Get the programming cable, I got mine on Amazon. This is the software I like to use: https://chirp.danplanet.com/projects/chirp/wiki/Home

Radio... | Answered on Mar 28, 2019 | 118 views

Not finding what you are looking for?
Inland ProHT Bluetooth Headset Red Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Inland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1658 Answers

Brad Brown

Level 3 Expert

18520 Answers

Tom Chichester

Level 3 Expert

60200 Answers

Are you an Inland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...