Inland ProHT Bluetooth Headset Red - Page 6 - Answered Questions & Fixed issues

Hello Jeff, I was looking for the user manual of your CB Radio Hatadi, to know what fuse it takes and there is no information
I would try the 5 Amp, I would place it and it would work for a long time to the BC Radio, checking that the fuse resists the transmission work
If it does not resist, I would put the 10 Amp and would do the same test
If it does not resist either, then you already have problems with the equipment
If so, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil
Hola Jeff, estuve buscando el manual de usuario de tu CB Radio Hatadi, para saber que fusible lleva y no hay informacion
Yo probar?a con el de 5 Amp, lo colocar?a y har?a funcionar por un rato largo al BC Radio, comprobando que el fusible resista el trabajo de trasmisi?n
Si no resiste, pondr?a el de 10 Amp y har?a la misma prueba
Si tampoco resiste, entonces ya tienes problemas en el equipo
Si es as? busca un servicio t?cnico especializado
Espero Puedas resolver el problema
Saludos Franco Dosil

Radio... | Answered on May 24, 2019 | 139 views get help from above link, it is user guide and some problem and their solutions.

Radio... | Answered on May 22, 2019 | 136 views

See this site, and if you want to appear you can do practice for examination.

Radio... | Answered on May 22, 2019 | 139 views

Its better you change the speaker if you need more audio otherwise its ok, at least your hearing the sound.

Radio... | Answered on May 22, 2019 | 139 views

Raymarine Ray55 Manuals Down Load user manual and reset MMSI according instructions.

Radio... | Answered on May 21, 2019 | 278 views

You have the modulation problem. If you have hand free you connect it and try to send message, if other unit hear you then it mean your microphone has faulty and replace the microphone, the fault is in mic or other circuit from mic input to modulation device which may be any transistor , capacitor or any resistance faulty. Consult with any Radio Service Shop.

Radio... | Answered on May 21, 2019 | 144 views

You check your radio with other radio very near. If radio is hearing your transmission then it mean that your Radio Power Module not working if very near radio not listening you then your preamplifier and Power amplifier is not working, it mean your Radio Transmitter faulty, only Receiver is working, you consult with any Radio Service shop. One other thing if you have software also check Tx/Rx frequency it must be same for simplex operation.

Radio... | Answered on May 21, 2019 | 230 views

Download user manual from above link and read page 12 for scanning.

Radio... | Answered on May 21, 2019 | 140 views Down load user manual from above link and read page 12.

Radio... | Answered on May 21, 2019 | 135 views

heck out this site it has the alignmet procidure to set the squeltch and RF power output , Also a great easy mod for 400 yes 400 channels , enjoy

Radio... | Answered on May 19, 2019 | 204 views

With Power OFF button or remove the battery.

Radio... | Answered on May 17, 2019 | 141 views

Open programming of your radio, read it and see in programming help about Baud Rate, normally it is a speed of programming of your radio. If you can read/write with same rate then you no need to change it.

Radio... | Answered on May 17, 2019 | 136 views

You can enable the vox function, first you read your radio by using attached link.

Radio... | Answered on May 17, 2019 | 146 views

Your Mic problem, you repair the mic or change the headset.

Radio... | Answered on May 13, 2019 | 138 views

Not finding what you are looking for?
Inland ProHT Bluetooth Headset Red Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Inland Radio Communications Experts


Level 3 Expert

1658 Answers

Brad Brown

Level 3 Expert

18520 Answers

Tom Chichester

Level 3 Expert

60366 Answers

Are you an Inland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides