Inland ProHT Bluetooth Headset Red - Page 2 - Answered Questions & Fixed issues

try putting in your make an model then search google for (your item+mk+model+pinout?) like this. *shruggs* mite get lucky

Radio... | Answered on Feb 10, 2020 | 96 views

I do not know about these items but if it works on other phones then a few things spring to mind, that moto might use a different version of plug like a "3 ring + tip" plus there maybe one with 4 + tip. Another thought is the mic needs power if its an electret type which that moto does not supply.
The connection of those earbuds may be wired a little different to how moto needs, many manufacturers do this so you buy their bits and bobs.
Lastly the moto may need some feature selection in its menu system to be turned on so look through its settings for audio-microphone etc.
Hope this might help

Radio... | Answered on Feb 04, 2020 | 87 views

You might be lucky but I would doubt it, to me its another Chinese funny, things made for certain companies or supplied to companies who are the sole or limited suppliers.
I noticed on the rear of the instruction manual it only gave a short labour warranty and had its company location, most of these type purchases require return to the place that sold it or they will give a service agent to send it to.
I have found that with these items parts and manuals are not around so if you are going to fix it yourself you would have to wing it, as they can be made with a variety of parts not the same set as time passes.

Hope this helps in some way.........

Radio... | Answered on Feb 04, 2020 | 165 views

Scala ic5 download software?

(If you don't have it installed, download Java here.) ... This lets you run single-file Scala programs in your browser using Scala.js, including graphical/interactive ...

First, make sure you have the Java 8 JDK installed.

To check, open the terminal and type:
java -version(Make sure you have version 1.8.)
(If you don't have it installed, download Java here.)

Then, install Scala:

...either by installing an IDE such as IntelliJ, or sbt, Scala's build tool.

Best if you prefer a full-featured IDE (recommended for beginners)
·Getting Started with Scala in IntelliJ ·Building a Scala Project with IntelliJ and sbt
·Testing Scala in IntelliJ with ScalaTest
Best if you are familiar with the command line
·Getting Started with Scala and sbt on the Command Line ·Testing Scala with sbt and ScalaTest on the Command Line Compared to other programming languages, installing Scala is a bit unusual. Scala is unusual because it is usually installed for each of your Scala projects rather than being installed system-wide. Both of the above options manage (via sbt) a specific Scala version per Scala project you create.

But it's also possible to "install" Scala in numerous other ways; e.g., grab Scala binaries and use Scala from the command line or use Scala in your browser!

Radio... | Answered on Jan 24, 2020 | 95 views

I think the problem is you may have to hold the power button in for a few seconds so that the buds know that YOU want them on and not your pocket! It's a common practice these days to do that so that the device doesn't drain unexpectedly. The manual should tell you how to do this.

Radio... | Answered on Nov 10, 2019 | 276 views

The user manual should be available on the Radio Shack / Tandy website.

Radio... | Answered on Nov 10, 2019 | 320 views

Not without some serious board modification.

Radio... | Answered on Nov 05, 2019 | 278 views

Hi Peter,

First of all, when your radio is not receiving, check first other radio it might be, not of the same channel/frequency/CTCSS/DPL/PL, and must be operating in a simplex mode,

If still not working, you can bring it to the nearest Radio shop in your place, to verify the receiving circuit,

Thanks have a great day,


Radio... | Answered on Nov 03, 2019 | 143 views

Your Kenwood radio has programmable squelch. It is accessible through the software. However, if the squelch knob (pot) has been broken, it must be fixed or replaced. Move the control knobs back and forth, do either move more than say 1/16 of an inch? If so, they likely broke inside. You could open the radio, resolder the switch, which I called a pot and see if that works. If not, take it to a dealer or sadly, buy another radio.

Radio... | Answered on Nov 02, 2019 | 121 views

try this: The only known way to get VFO mode to work again is to connect the radio to a PC with a kenwood-compatible programming lead and use the puxing 6in1 software to turn off the lock option.

Radio... | Answered on Nov 02, 2019 | 128 views

I did a lot of digging around. Your FT-301 is a nice radio. However the service manual does not have the mic "pin out. " The Ham Forums do not have the mic wiring either. I did find that almost all mics are not wired the same as the Yaesu. Could you just buy a Yaesu mic? Sorry I cannot find this.

Radio... | Answered on Nov 02, 2019 | 109 views

Even saying ICOM would help people to help you. That radio requires software and a programming cable adapter. It is new enough to do Narrow band. Best bet is to find an ICOM dealer to program it for you. That way, it will be on legal frequencies. Your unit is VHF, so it cannot talk to GMRS over the counter radios. It is a decent radio, we sold them and the battery life was good. Ask more if you want to know more.

Radio... | Answered on Nov 02, 2019 | 109 views

Your scanner was also marketed as the GRE PSR-244, and it's nearly identical to the Radio Shack PRO-62. I couldn't locate a manual for the Commtel or GRE, but you download/print instructions for the PRO-62 here:

Bill B

Radio... | Answered on Oct 31, 2019 | 799 views

All you have to do is turn then off and when you're going to turn them back on keep pressing the power button until you hear bluetooth linking, it won't ask for a pin after that.

Radio... | Answered on Oct 11, 2020 | 5,940 views

Make certain the AM/FM radio is off. You cannot squelch when it is on. Try adjusting again. If it does not stop the squelch noise, the switch is dirty or broken. To go further means taking it apart. You will try to "clean" the switch. Do you want to take it apart?

Radio... | Answered on Oct 23, 2019 | 106 views

What base is it, You need to read your question and figure that they can't read your mind, so post the complete question with all the facts.

Radio... | Answered on Oct 23, 2019 | 141 views

You should know better than to ask this in a public forum. It is ******* to increase the power on a CB radio. Try searching Google for that.

Radio... | Answered on Oct 23, 2019 | 160 views

There may be a button on the headset that will un-mute it, try holding the button down while wearing it, it may announce un-muted.

Radio... | Answered on Oct 23, 2019 | 146 views

Many police have gone to encrypted radio, so you may not be able to get that on most cheap scanners. even much more expensive scanners won't do it without a modification, but that is not legal to do that.

Radio... | Answered on Oct 23, 2019 | 173 views

Not finding what you are looking for?
Inland ProHT Bluetooth Headset Red Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Inland Radio Communications Experts


Level 3 Expert

1658 Answers

Brad Brown

Level 3 Expert

18515 Answers

Tom Chichester

Level 3 Expert

60148 Answers

Are you an Inland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides