Top 20
Sony Ericsson Black Silver Cedar J108i Unlocked Gsm Phone Questions & Answers
Phone not recognising sim card. Window pops up which says 'insert sim card or to view a demo of this phone first press Demo"
Sim contacts may be dirty, either on the card or phone.
remove sim card and GENTLY rub a pencil eraser on the contacts to clean, then test. If you can access the contacts on the phone, do likewise. If not, then you'll have to use an Ether based cleaner, Like electrical parts spray ( available from your local auto parts store) .
be careful not to spray too much into the phone, as once the spray gets inside it takes longer to evaporate. You can counter the time by using compressed air to speed drying of the phone interior without taking it apart.
Hope this helps!!
Unlock sim on sonyericsson cedar j108i
Hi visit
prounlocking.com to unlock your sony ericsson j108i mobile from network lock .here they ask you the network name to which your mobile is locked and the imei number of your mobile .then at last they send you code to unlock your mobile.
Sony Ericson 250i Headset not recognised
The wire to headsets can get damaged (usually not visible from the outside, as the wires inside the covering can be very delicate, to keep the size of the wire down) from throwing them in the pocket, purse, etc. Try a set from a friend to make sure the device is still working itself.
How to wire a fridge thermostat
Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:
- Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
- Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
- Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
- Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.
4/19/2024 6:14:37 AM •
Radio...
•
15 views • 0 helpful votes
Serial Number for KPG-790
All questions need FULL 'make model (what it is) first 3 words please.
Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity.
https://www.google.com/search?q=KPG-790
..
2/14/2024 9:40:26 PM •
Radio...
•
30 views • 0 helpful votes
Not finding what you are looking for?