20 Most Recent 2wire (1000-400108-001) Router - Page 6 Questions & Answers

Unplug the power cord for the router for 30 seconds and then plug it back in.

2wire... | Answered on Oct 24, 2010

your key code is listed on the under side of the modem.

2wire... | Answered on Oct 21, 2010

move it closer to the router or visa verser also you can get a wifi areial which may help.

2wire... | Answered on Oct 06, 2010

easiest way if you don't know it is to just reset it. With the router powered on hold down the reset button on the back for 10 seconds. This will return the router to it's factory settings. You can then connect without a password and then set the security and network key to your liking.

2wire... | Answered on Sep 29, 2010

Run your DVRs outomated network setup.. If this fails, you will have to get the ip settings manually. to find them, use a computer that is connected to the router.. Do start, run, type cmd, press enter. In the black window that comes up type ipconfig /all this will give you the settings the DVR wants. choose manual setup from your DVRs network connection menu.

2wire... | Answered on Sep 29, 2010

1. you will have to access the routers permissions page.
You should be able to access the admin page through a browser page using or . Check your user manual for the correct IP address to access the Admin page.
2. You will need to allow the I POD to access the internet via your router with either the MAC ( Media Access Control ) address or be an IP assigned by the router.
3. You will need to set up your (DHCP) Dynamic Host Control Protocol ) and your DNS (Domain Name Service / Server) automatically.

2wire... | Answered on Sep 28, 2010

I'm not sure why your hawking is not compatible, it probably shuold be as long as it's on the same band and supports the same security settings (key/algorithm/etc.)

I'd start off with your hawking by changing it to open with no security, then try to setup your hawking. If that doesn't work then you may be right about it not being compatible. If it doesn,then add some remedial security like shared/wep40bit, then try to move up to a wpa2personal level of security.

2wire... | Answered on Sep 25, 2010

You can download drivers here (Win)
or here (Mac)
Instructions is here. (Win) (Mac)

2wire... | Answered on Sep 21, 2010

You can find guide here.
If you get CD with your router, insert it in your computer and run setup on it. First connect Router to PC trough USB cable, which you get in package. If you dont have one, you can try connect with ethernet cable.

2wire... | Answered on Sep 21, 2010

The most possible reason is the distance between the router and the laptop. Try to reduce this distance to check it out.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
direct fixya link: http://www.fixya.com/users/technical114

2wire... | Answered on Sep 18, 2010

I would recommend doing a 30/30/30 reset. Press and hold the reset button while it's plugged in for 30 seconds, then unplug it, continue holding the reset button for 30 seconds, then plug it in, continue holding the reset button for 30 seconds. Then I would power cycle it once more: unplug it, wait 30 seconds, then plug it in. If there is no reset button, I would contact the manufacturer on how to change the language setting.

2wire... | Answered on Sep 14, 2010

1)Are you able to ping your gateway?
2) Are you able to ping public dns

if above both is working fine then check the dns..

2wire... | Answered on Sep 13, 2010

Ok I need a little more information here, but can definitely help you. Do you currently have any computers hooked up to this router, and are any of them working? Do you have the model number of the router? It should be located on the actual router unit somewhere, either on a sticker on the bottom, or somewhere similar.

Please let me know this information and I can definitely help you fix this!


2wire... | Answered on Sep 09, 2010

radio shack sells universal power adapters of all sorts or you can try ebay ebay is the cheapest route

2wire... | Answered on Sep 02, 2010

This may be a filter problem on the phone line.
Have you got a plug in filter on the main phone socket?Usually they provide 2 filters with routers.
when you pick up the phone can you hear crackling if you can it's the filter.Bad connections on plugs.cable short or open.

2wire... | Answered on Sep 02, 2010

Connect your router to computer with ethernet cable then you can access it with following default link. or or or If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

2wire... | Answered on Aug 29, 2010

if you need to reset your router, please follow the procedure in the link mentioned below

2wire... | Answered on Aug 20, 2010

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

436 questions posted

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts


Level 3 Expert

1997 Answers

Ron Stone

Level 2 Expert

398 Answers


Level 3 Expert

4369 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

2wire Computers & Internet

  • 2wire Computers & Internet

Most Popular Question

2wire 1000hw router keeps restarting

  • Computers & Internet