3Com NBX 2101 IP Phone - Answered Questions & Fixed issues

I have no dial tone, calls ring in but I can not answer them.

http://premiseone.net/files/hp-nbx/nbx50/pgbasic.pdf
http://pdf.textfiles.com/manuals/...A-E/3COM%20-%20%20nbx-100%20user%20guide.pdf
http://phone.manualsonline.com/manuals/mfg/3com/nbx_2102.html

3Com NBX 2101 IP... | Answered on Jun 24, 2017 | 206 views

1 Answer

When there is an operator message like "this number is not in service", NBX phone turns to extension and Audio codes turn to busy tone.

This is a phone company recording and is normal for a call that can't complete. It has nothing to do with the phone system.

3Com NBX 2101 IP... | Answered on Jan 08, 2015 | 77 views

1 Answer

When there is an operator message like "this number is not in service", NBX phone turns to extension and Audio codes turn to busy tone.

Are you saying that the phone boots up and has the extension on the display but when called by another phone it is busy?

3Com NBX 2101 IP... | Answered on Apr 04, 2014 | 67 views

1 Answer

I try to install 3

Turn on auto discover phones under system settings.

3Com NBX 2101 IP... | Answered on Nov 11, 2013 | 47 views

1 Answer

Reboot the phone system (through the browser) and this should take care of it. There are limited voicemail ports and sometimes they get put on hold and can't be released. I have seen it a lot. some versions of software can clear this but a reboot will take care of it.

3Com NBX... | Answered on Nov 11, 2013 | 58 views

1 Answer

Do not see all phones available to add to a hunt group

This is a Internet Explorer issue. If you use it in "compatibility view" it will show all users when you click on show all users. Otherwise use google chrome or firefox.

3Com NBX... | Answered on Nov 11, 2013 | 80 views

1 Answer

How to factory reset a 3com Baseline 2824 switch

A very simple solution to r epairing all by yourself is getting help from handbooks, they're very detailed and complete in every way so for me it was my b est source to repair
one of the top sites for this is https://big-manuals.com/

3Com Computers &... | Answered on Dec 07, 2018 | 364 views

1 Answer

MY wireless mouse stopped working need help

Time for a new mouse!

I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

3Com Computers &... | Answered on Feb 08, 2018 | 73 views

1 Answer

HI, I have two 3com

I don't know anything about these units, nor do I have time to source any docs for you, but maybe you can try connecting a PC directly to the port your patch panel is connecting the the switch from, you can at least see if that port is working.
My next and only other suggestion is to invest in a "LAN cable tester". In my area, you can find cheap ones for U$20.
The tester will allow you to check connectivity between any two ports, and allows you to test both patch links and individual CAT5/6 cables.
Good luck!

3Com Computers &... | Answered on Nov 22, 2017 | 161 views

1 Answer

Facebook recovery

notify the police dept / person handling the case and let them know about the face book information

3Com Computers &... | Answered on Nov 08, 2017 | 82 views

1 Answer

Decrypt 3com password

Use a brute force password solver or at best do a reset

3Com Computers &... | Answered on Dec 07, 2016 | 787 views

1 Answer

Do you repair 3ComImpact IQ External ISDN Modems Model #: 3C882

Fixya offers advice to DIY people. With something like you are talking about, it would not be easy because of parts, and manufacturing processes. Also it might cost more to have it repaired than to get a new one.

3Com Computers &... | Answered on May 02, 2015 | 210 views

1 Answer

3com 40 0483 001 driver

Hi,
I hope this link is waht you need.
http://www8.hp.com/us/en/support-search.html?tab=1#!=&qryterm=3com 40 0483 001 ethernet&search_searchtype=s-002

If not please the exact model of your device.
Good luck

3Com Computers &... | Answered on Mar 07, 2015 | 313 views

1 Answer

I want to know how I can re-set my 3Com 3crwe955275 wireless access point to its default factory settings. Can anyone help?

1 Remove power from the Gateway. 2 Disconnect all your computers and the cable/DSL modem from the Gateway router. 3 Using a straight through Ethernet cable, connect the Ethernet Cable/DSL port on the rear of the Gateway to any one of the LAN ports. 4 Re-apply power to the Gateway. The Alert LED will flash as the Gateway starts up, and after approximately 30 seconds will start to flash more slowly (typically 2 seconds on, 2 seconds off). Once the Alert LED has started to flash slowly, remove power from the Gateway. 5 Remove the cable connecting the Cable/DSL port to the LAN port, and reconnect one of your computers to one of the Gateway LAN ports. 6 Re-apply power to the Gateway, and when the start-up sequence has completed, browse to: http://192.168.1.1 and run the configuration wizard. You may need to restart your computer before you attempt this. 7 When the configuration wizard has completed, you may reconnect your network as it was before

Here on page 85 of the manual
3Com 3CRWE53172 User Manual Forgotten Password And Reset To Factory...

3Com Computers &... | Answered on Mar 03, 2015 | 403 views

1 Answer

What is 3x phone

For 3Com that would mean a 3100 series or 3500 series phones. The 3100 series phones are for NBX and VCX phone systems and the 3500 series phones are for VCX only. Both are also SIP compliant.

3Com Computers &... | Answered on Jan 08, 2015 | 73 views

1 Answer

Db9 rj45 pinout

Here is the standard pinout for a console port on a router to seriel port for computers

3Com Computers &... | Answered on Feb 01, 2020 | 4,059 views

1 Answer

How reset 3com 4228g switch

If I remember correctly, there is a tiny hole at the back or on the side. Press a paper clip into it. The switch should do a full reset and then reboot. If its just locked up, I would switch off at the power for 15 mins and try let it do an auto restart itself. Do this before you go doing a full button press reset as you may lose any or all updates the switch has had loaded into it.

3Com Computers &... | Answered on Sep 02, 2014 | 397 views

1 Answer

Network card driver

Are you able to remove the card from your PC?
and read the model on it?
Are you able to find your motherboard/computer model?
use the motherboard/computer model to find what model of card is on it.
Once you have the nic model search for a driver.

3Com Computers &... | Answered on Jun 20, 2014 | 69 views

1 Answer

3COM 3100 entry phone, how to configure SIP

From Digium Mailing List:

3Com 3100 series phones do not support SIP with non-3Com systems. They have a basic boot loader which must download code from a 3Com NBX or a 3Com VCX system. If you don't have either of these, then you won't get runtime code on the phone, thereby making it impossible to use the thing with Asterisk.

Asterisk Users 3Com Phones

3Com Computers &... | Answered on Apr 08, 2014 | 206 views

1 Answer