3Com SuperStack 3 3824 (3cr17402-91-uk) 44x1000 Mbps Networking Switch - Page 4 - Answered Questions & Fixed issues

John -
Could you provide more details about your modem and what type of connection you have?
Thanks.

try setting nic's to 10 mb full duplex instead of auto.

do you know the type of modem you are using? if so you may go to the manufacture's website and download the drivers, Google search the type of modem and drivers, or if you still have the installation disk you may just run that and the problem will be fixed. Smile!

Does the motherboard have a "purple" socket?
Does your keyboard have a "purple" end?
If so, join the male to the female,
rotating the male until the stiff pins line-up with the holes.

Does the motherboard have a "green" socket?
Does your mouse have a "green" end?
If so, join the male to the female.

The end on the monitor's video-cable has 3 rows of pins;
there's only one place on the computer with 3 rows of holes.
Notice that the sides of the male are tapered,
so that it only fits ONE way into the female.

Similarly, the female end on the power-cord is tapered,
so that it only fits ONE way into the back of the computer.
Note where it connects -- there may be a "rocker" switch,
with a '1' and a '0' on the ends of the rocker.
Press the '0' end down before you reconnect everything.
Press the '1' end down after everything has been reconnected.

Do your PC speakers have a green tip?
If so, then connect the male from the speakers to the green female socket.

Try this, it is free for the basic version.

http://www.topocr.com/index.html I’m happy to assist further over the phone at https://www.6ya.com/expert/dan_91204789c5bd4b93

First what is the make and model of the router? See if there is a firmware update first. If not you may want to consider replacing it. You can even get wireless N routers now for 40$. Wireless G routers can be bought for as little as 20$. If you still have any questions please let me know.
Thank you,
Lee

check signal level as more than 20 percent is needed for auto enable but light will change at 15 so you might have to manually enable the dongle in your settings tab.

how do i reinstall my web camara

Search for E6400 modem at: www.NexTag.com/Electronics

Here you go
http://mimizun.com/machi/machi/kana/1204151767.html

Refer the following links

1. http://www.recoveryengine.com/excel-password/
2. http://3d2f.com/programs/2-679-excel-password-recovery-download.shtml

Congrats dude your account has been successfully created, your gmail password details already sent to you ....after openning the gmail account please check the inbox for your warez-bb account details.....good luck

Hello monkie_gurl2,

This usually happens when the browser cannot access the internet. Make sure your firewall settings allow the browser to access the internet. Also, make sure you are connecting to the internet ok by checking email. And internet explorer can help diagnose the problem by selecting the 'Tools' menu option and then selecting 'Diagnose Connection Problems...'. Finally, the internet explorer settings can be examined and changed by selecting the 'Tools' menu option and then selecting 'Internet Options'

I thank you for giving a rating to this solution if it has been helpful.

Have a great day,
martyshaw562

he will connect right and disconnect all phones in another room and he will check if led DSL give continues light or not

Go to chikka.com. Register your phone and download the chikka messenger. You will be able to send sms from there. When your buddy is online, you can also chat like on YM. But this has less functionalities though.

Hi there,

Download the device driver on HERE & HERE.

Let me know

micro

First you have to create the account with your ISP or webmail provider. Once you have done that and have a username and password go to this webpage which has a tutorial on how to set up a new account using Outlook Express.
http://alturl.com/5nmv

Da erro? Tente esta alternativa: http://www.centraldriver.net/driver.php?codigo=788

Vmware product for server like ESX and ESXi accept mostly Broadcom cards and intel cards preferably the server ones.

I have successfully installed esxi 3.5 on Intel 10/100S cards myself.

Here is a list of compatible Hardware: list

As suggested previously, Please take manual backup of data folder of tally and reinstall the software.