20 Most Recent Intel Dot Station (INTC300AIO) PC Desktop - Page 3 Questions & Answers

reinstal the OS you had a strong virus reinstal the OS this shoul fix the problem

This will not be a wise decision ..cause every system has its own configuration and when you will put it back you will have problems detecting the hardware on this one ...What I suggest is to insert the disk anyway ...and try to restart ..go to bios ..and make the boot priority on the Cd if it is not already set ....and boot from cd ...
The idea is that even if you got a virus and affects your disk drive detection into windows..when you boot from the Cd ..the old windows has nothing to do with what is going on than ...and it will work ...Just try and see...anyway ..only if the Cd drive is damaged physically this will not work ..but if its driver is affected by a virus will work and the installation will go on normally ...
In case is not working ...than you can just open the unit ..and inside you will see that the Hdd is only kept in place by the screws at the sides...and it has the bus cable and the power ...Removing them ..and after that the screws(pay attention that it may have on both sides...) or some models have just a lever that its keeping it in place ......

Using the F2 key.

celeron 300 cpu and 64mb ram.
IF you need the software for your function keys, here is the link , its just below the picture of your mmmmm pc thingy on the right side of the screen http://www.bigapple.in/Inteldotstation.html
I would use it as a door stop and bu a replacement from ebay, get a whole system for £50

back panel open with star scru

you buy the sound card then slot to PCI
or you call a technician

intel DOt.station system is can not reboot the system, and how open the monitor head

get a usb xp edition

scan your compter with a good antivirus program.
if still not working then try using another keyboard

Congratulations!!

its probly a virus in ur motherboard
format ur computer

F1 = HELP F2 = RENAME SELECTED ITEM, F3 = SEARCH FOR FILE OR FOLDER, F4 =Display the Address bar list in My Computer or Windows Explorer, F5 =Refresh the active window. F6 = Cycle through screen elements in a window or on the desktop. F7 =Displays all commands for this program stored in memory in a pop-up box. Use the UP ARROW key and the DOWN ARROW key to select the command you want, and press ENTER to run the command. You can also note the sequential number in front of the command and use this number in conjunction with the F9 key. , F8 =Displays all commands in the history buffer that start with the characters in the current COMMAND , F9 =Prompts you for a history buffer command number, then displays the command associated with the number you specify. Press ENTER to run the command. To display all the numbers and their associated commands, press F7., F10 =Activate the menu bar in the active program, ALT+F10= Deletes all macro definitions.


UZOWUANYA
e-mail: [email protected]

sometimes you have to leave battery out up to 24 hours for it to reset. Make sure it is unplugged from any power too.

Cost depends on buy rate ie retail vs wholesale,and when,
last year ???
this year???
volume of purchase???
1 or 100???
Dealerships involving Franchise normally state the ground rules before trading begins.Contracts,etc...
In this case re Dealership,security may refer to equity paid up in the business you own and projected sales per volume versus actual sales,liabilitys and margins etc....All costs something....
Do your homework if your going to invest.Best posible aproach.
Hope this helps

Rs.6500/-

Non repairable & outdated PIII. Just support 256MB SD RAM & P-III upto 700MHz only
For the same price a PIV branded machines with 80GB & 512 DDR RAM are available in Nehru Place New Delhi

i have not good key acces

Please reformat your hard disk, make sure to delete all the files and also the partition. Then try to re-install again the operating system.

hi normally if your system came with 100mhz ram that is all it will take as this has been specifically designed for that mhz of ram so i do not think that the 133mhz ram will work, all tho it is cheap enough to buy now, it might be worth giving it a try you will not damage anything doing so, but i think you will find that it will not work....hope this helps

press the first button in front of pc below power button throw left one time, press it continuously for 3 seconds, now green led blinks, thats all change whatever is it height, width or anything