20 Most Recent Nortel Norstar Meridian Phone System With Voicemail And 7 Phones M7310 M7324 - Page 9 Questions & Answers


It could be that the background music feature is turned on but doesn't have a misic player attached. Try entering in feature #86 while the handset is in its cradle.

Nortel Lands... | Answered on Oct 08, 2010


You could either shorten the rings to 3 for call forward no answer on the CEO's phone or have the receptionist's cfna lenghtened to 6 rings.Depending on how the initial programming was set up you might also check the prime set assignment for the CEO's line to see if its set for her DN.

Nortel Lands... | Answered on May 06, 2010


usually there is a small slide switch on the side of the answering machine that you can use to control how many rings before it answers. if that is a new digital model you will likely have to go into the menu to set it up. often your choices are two, four or toll saver.

robert

Please take a moment to rate this solution thanks

Nortel Lands... | Answered on Nov 10, 2009


Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
If asked for a password enter the same 2 3 6 4 6.

If that doesn't work you may have the newer Compact ICS or the Modulur 0x32 control unit wish will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
When in programming2.gif just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, just press back (lower left)
Example: To change the Time & Date Press next until you see Time & Date. Then show Then change Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.

Nortel Lands... | Answered on Oct 08, 2009


You need to go into system programming and set that extension to "Forward no answer" to the extension of the voicemail.

If you dont know what that means, I would call someone in, as you can ruin your system by doing the wrong things.

Nortel Lands... | Answered on Aug 05, 2009


Reset the system. Just kill power and let stand for 10 seconds before restoring power.

If problem persists, programming might not be set correctly for the types of lines you have.

Nortel Lands... | Answered on Jul 08, 2009


To disable DND on a Norstar system,
dial FEATURE # 8 5
from the set.

Nortel Lands... | Answered on Mar 24, 2009


The way 4 line phones work is that you need 4 lines on every jack that is connected to your phone.
You see the light probably because one of the phones has line conected and you see line appearance.

Nortel Lands... | Answered on Mar 21, 2009


try to check the telephone wire connections. or try to use the other phone box to test.

Nortel Lands... | Answered on Sep 14, 2008


tanderburg is fine but ask about dealer or agent near you for availlable technical support(this in case you have video conference in your businnes ).-ask for second hand machine to save your money and check it will befor you pay anything.-check for availlable manual on line-complete your connetion from radio shack near you.

Nortel Lands... | Answered on Jul 27, 2008


If your Gigaset c620a phone has no dialing tone, I suggest resetting or doing a factory reset of your phone.
Similarly, then the power to the base unit and also remove the batteries from the handset.
After 10 minutes, insert the batteries and then check the phone.

Lands Phones | Answered on Nov 21, 2020


How can I tell if this is really a good choice
https://set-magazine.com/

Lands Phones | Answered on Nov 16, 2020


If it does not charge at all; the battery in it should be replaced. It will be weak. Replace it. The phone will work.
Gopakumar Gopalan Google

Lands Phones | Answered on Nov 12, 2020


Manual is useless!
https://www.manualslib.com/manual/776581/Philips-Cd-740.html?page=2#manual

This works for the televisions, see if it works for CD players

How to change the language of my Philips TV menu?
  • Press the [Power] button on the remote control to reset the TV.
  • Press the [Menu] button on the remote control.
  • Press cursor [Down] 3 times to the last item in the main menu and press cursor [Left] or [Right].
  • Press cursor [Left] or [Right] repeatedly to select the desired language.
More items...

How to change the language of my Philips TV menu? ' Philips

Lands Phones | Answered on Nov 07, 2020


With my Moto-G I press the volume button then tap the top icon till it shows a bell. Pressing both buttons together can also toggle sound on/off.

Lands Phones | Answered on Oct 21, 2020


https://www.brisbanepropertyvaluations.com.au/

Lands Phones | Answered on Oct 02, 2020

Not finding what you are looking for?
Nortel Norstar Meridian Phone System With Voicemail And 7 Phones M7310 M7324 Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

Cindy Wells

Level 3 Expert

6199 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nortel Lands Phones

  • Nortel Lands Phones

Most Popular Question

norstar m7310 all features inactive

  • Lands Phones
Loading...