Nortel LG-IP Phone 8830 VoIP phone - Page 2 - Answered Questions & Fixed issues
How do you transfer a call on a Nortel t7208?
This is usually programmed as one of the 'soft' buttons down the right hand side of the device - subject to the programming of your phone / and the system.Usually the T7208 is connected to the BCM range of PBX systems - in which case, to transfer a call, you'd use Feature 70. You could, of course, program this into one of the buttons yourself, so you only have to press one button to do so.Hope this is of use to you. :)
10/6/2015 7:57:06 PM •
Nortel Lands...
•
Answered
on Oct 06, 2015
•
635 views
How to make a Nortel phone model M7310 ring
If the phone doesn't ring when called by the extension number of the phone then try to use the volume up button while someone is calling the phone. The volume is a multi-purpose button that doubles for phone volume and ringer volume. However, the only way to turn up the ringer is when a call is coming into the phone.
7/9/2015 4:45:10 PM •
Nortel Lands...
•
Answered
on Jul 09, 2015
•
516 views
NO DIAL TONE ON HANDSET
Check that the handset is plugged in correctly (some phones have a jack for a headset as well as handset.
Try another handset.
Try another handset cord (cords are a failure point).
Make sure the cradle switch is not stuck down.
2/2/2015 8:52:09 PM •
Nortel Lands...
•
Answered
on Feb 02, 2015
•
81 views
Remove do not disturb
You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.
2/2/2015 8:31:47 PM •
Nortel Lands...
•
Answered
on Feb 02, 2015
•
459 views
Not finding what you are looking for?