Nortel Networks Meridian M3904 Corded Office Phone - Answered Questions & Fixed issues
How do I set up a voice mail with a Nortel M3904?
This is dependent on you being able to access your voicemail mailbox (a mailbox has been setup for you by the administrator and you know the codes to login to your mailbox). Go to your voicemail which should be:
- press the message key.
- Enter your mailbox number, then press #
- Enter your password, then press #. (if you don't know this then you will have to contact the administrator for the telephone system)
When logged into this:
- press 82.
- Press 1 for external greeting, 2 for internal greeting, 3 for temporary greeting, or 9 for Personal Verification (spoken name)
- Press 5 to record then wait for tone.
- Press # to end recording
- Press 2 to listen to the greeting
- Press 76 then 5 to delete the greeting and re-record it.
- Press 4 to return to your messages.
How can I program the calls to go to the new location but same extension # on Nortel Networks T7316 phone?
To program the calls to go to the new location with the same extension number on a Nortel Networks T7316 phone, you will need to update the call routing information in the phone system's programming.
Here are the steps you can follow:
- Access the programming mode on the phone system. This typically involves entering a password or code on the phone's keypad.
- Locate the call routing configuration for the extension in question. This may be in a menu for "extensions" or "call routing," depending on the specific phone system.
- Edit the call routing information to reflect the new location of the extension. This may involve specifying a new phone number, a new group or queue, or a new set of forwarding rules.
- Save the changes and exit the programming mode.
Once you have completed these steps, incoming calls should be routed to the new location of the extension, even though the extension number remains the same. Note that it may take some time for the changes to propagate through the phone system, so it is possible that calls may still go to the old location for a brief period of time after the changes are made.
3/7/2023 11:19:08 AM •
Nortel Lands...
•
Answered
on Mar 07, 2023
•
40 views
I have a Nortel Jazz 420 and it suddenly turned on pulse mode instead tone mode. How could I turn it on tone mode ? Pierre
Try this
Tone dialing allows your telephone to communicate with devices and services that respond to tone signals, such as answering machines, fax, or automatic switchboards. Want to learn how to switch from pulse to tone dialing on the Nortel phone? Follow these simple steps.
While on an active line, or after selecting the line, press # and the phone will switch from pulse to tone dialing. After you hang up the phone, your phone will return to pulse dialing. You may repeat these steps as needed.
6/23/2022 4:29:56 PM •
Nortel Lands...
•
Answered
on Jun 23, 2022
•
70 views
Nortel T7316e Mbox Locked
The system administrator must reset your password - it will default to 0000. advise if you are the system admin.
4/6/2018 11:43:16 PM •
Nortel Lands...
•
Answered
on Apr 06, 2018
•
291 views
Not finding what you are looking for?