20 Most Recent
Kenwood Kpg-35 V2.00 Programming Software Tk-480 Tk-481 - Page 2 Questions & Answers
TS 850 Kenwood Dial not working
That radio is past the end of life support and parts cannot be gotten. The older units had issues with chips in them that control the tuner and generate signals, the chips are custom made for Kenwood. You may be able to sell it on EBAY for parts.
My Kenwood TS-B2000 won't power up after firmware update failed.
Because your Radio is not power up so you have must change the EEPROM of your radio from Radio Service Shop, because your old EEPROM all data erased. Normally during update failure this not happen and Radio powerup, only programming of radio erase and LCD show no program and thid fault can be rectify when again updating process run, but your problem is not like that, your radio is not powerup, so you need to change EEPROM then your problem will be solve
Prog 1152 displayed on screen
You press side button or keyboad button one by one and see this number change and and light flashing occure or not, if nothing happen then you check 1k ohm cp arround cpu, may be any cp open circuit and cpu not communicating with their peripheral.
How to reset password
You cannot reset if you dont' know, you need to replace the EEPROM IC or contact with Kenwood Co.
Can't write to tk-2207
You can read/write this radio by KPG-87D, open program, select model and write frequency. and write it at the radio, if you not succeed then change EEPROM and write ir,
Change language on a kenwood tk3207 radio
Your language is not change, you Mark "Scrambler" you unmark it and you problem will be solve. Because if you mark it then you will not understand the receiving signal.
Not finding what you are looking for?