20 Most Recent
Connex Cx-566ssb Night Runner 40ch Cb Radio, Very Loud - Page 9 Questions & Answers
How do i turn off blinking light after blueparrot is on
The blinking light tells you it is on and working it is also part of the setup process
The only two ways to stop it blinking is to shut down the headphones or dismantle the headset and disconnect the led
10/12/2022 12:50:40 PM •
Radio...
•
Answered
on Oct 12, 2022
Radio shack pro 2038
User Manuals are here;
http://support.radioshack.com/productinfo/DocumentResults.asp?sku_id=20-413&Name=Radio%20Scanners&Reuse=N
Best of Luck.
10/11/2022 4:03:53 PM •
Radio...
•
Answered
on Oct 11, 2022
How do I pair my bc-au-bs-206-bk speaker to my phone
Tip & How-To about Miscellaneous
Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.
Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.
Roughly speaking though.
Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.
With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.
When the Android or iPhone device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).
Posted by ADMIN... on Nov 19, 2016
This manual is probably close enough for this fine Chinese device.
https://fccid.io/2ASLD-P17/User-Manual/User-Manual-4196764
VIDEO
https://www.google.com/search?q=bc-au-bs-206-bk+speaker+pairing
..
8/24/2022 1:55:57 PM •
Radio...
•
Answered
on Aug 24, 2022
Nuvelli NUV2882 Stereo Bluetooth Headphone User Manual
There's no manual available, but if you want to pair your headphones with a computer or a phone follow this steps:
1.- Fully charge headphones (leds turn from red to steady blue
2.- Press for 8 seconds the lower button on the right (it has a phone symbol)
pressing the "phone" button will turn on the headphones, but if you keep pressing it will force the device to go to " Pair mode" you call tell is ready by noticing the LEDs turning blue and red. onces pairing is successful you will see a steady blue LED.
8/11/2022 9:52:16 AM •
Radio...
•
Answered
on Aug 11, 2022
HOW to link wireless earbuds
1. Go to your Phone's home screen and find the "Settings" icon.
2. Click on the "General" button under Settings.
3. Find the "Bluetooth" option and slide it over to turn the function on.
4. Your iPhone should find the device once this is enabled and should show the device name on screen. When it does that, you will need to hit the "Pair" button in order for the devices to sync. You may need to enter a four-digit password, which is provided with your wireless device.
5. Once that is entered, hit "Connect" on your iPhone to complete the setup. Your headphones should now be working properly.
You'll have to look up specific
instructions for your device by searching the model number. The pairing code will likely be 0000 or 1234
8/11/2022 6:27:54 AM •
Radio...
•
Answered
on Aug 11, 2022
How to programme channels on vertex standard
Hi Craig,Vertex Standard is the Make, and a very good Make.What you failed to add was the Model Number of your set.We need this info so we can help you find the answers you require.Please reply with Model Number and as much detail as you can regarding what you are looking for.Cheers,Peter
8/10/2022 2:21:13 AM •
Radio...
•
Answered
on Aug 10, 2022
T5100 Motorola's UHF don't talk to each other?
batteries weak
not same channel set
over 2miles it too far or any hills between you distances is less
as we say LINE OF SIGHT only, UHF rules of propagation. all
I am licensed EXTra ham and more. (MIL ET1 was)
even through walls through trees , LESS.
8/8/2022 4:00:20 PM •
Radio...
•
Answered
on Aug 08, 2022
Not finding what you are looking for?