20 Most Recent TDK Sound Cube - Black TP6701BLK - Page 4 Questions & Answers

How old is the player?

Hello,

To set the time on your ipod, turn on the iPod or access the main menu. Scan down the menu listings for "Settings." Use the click wheel to highlight "Settings." This will pull up a side-bar menu of options for the iPod. Pick Date& Time from the list of options on the side-bar menu. Once again you will be given a list of options. Highlight "Set Date & Time" using the click wheel and then select it using the center button.
Use the click wheel to change the current minutes setting. When you are finished, press the center button to move on to the hours setting.
Use the click wheel to change the current hours setting. As before, use the center button when you are finished. You have set the time on your iPod.
Take care.

Hi Getme out of here

You have to set bluetooth as default audio device. For doing this, go to >Contro Panel> Sound and Audio Devices>Audio(Tab) and in Default Device choose bluetooth device.
In my case, I had problem when i installed SP3 on XP. I changed my bluetooth driver to "Toshiba Bluetooth Stack V6.00.10" and it worked for me.

Hi there

We do not provide replacements for products. Your best bet would be to contact TDK for the replacement. It may be free if under warranty, or they may charge a fee for a new drive.

Thanks

With some of the TDK NX models the 9 pin lead between the subwoofer unit and the control unit gets damaged in careless connection. Its not the most idiot proof connection out there and when the connector is not aligned rotationally with the socket and/or pushed in at an angle, the connection pins can get bent. Sometimes if there arent too many pins bent, the pins can be carefully straightened and when properly inserted, the unit will work perfectly. In most cases however, one, or maybe even two fuses in the subwoofer unit will blow. If the unit doesnt work in your case after correcting the lead issue, open up the subwoofer unit by removing the screws around the outer edge of the back panel of the subwoofer (about 10 screws) and carefully prize the panel away from the subwoofer box. Sometimes this may be difficult as the back panel is glued to the subwoofer box to varying degrees. Dont pull the panel away from the box too far as it is connected internally by leads, etc. You should find the two fuses on the circuit boards attached the the inside of the back panel, one for the input transformer and one for the amplifier circuitry. Replace them (**** Smith or Tandy electronics stocks them) and you should be in business. If it still doesnt work, there may be some additional damaged caused, but this is rare. If you need a new lead, Imation (TDK) will supply you one at a cost. Hopefully you can get it up and running as it is a great little HiFi.

TRY BLOWIN IT OUT

The memory stick is too large - use 1 GB or smaller

Are you try to download directly to a computer or directly to a mp3 player discribe more detailedly to your probelm