US Night Vision D-141M Weapon Sight - Answered Questions & Fixed issues


Hello.


Contact us: [email protected] GB...stewbison

US Night Vision... | Answered on Sep 22, 2011 | 217 views


Sounds like terrmal run away of the power fet.
leaving it on that long caused it to be damaged.
many compact devices have simular toruble.when
you turn it back on it quickly over heats and shuts down. After a few seconds it cools enough to resume operation till it reachs cutoff temp causing the on off cycles.

US Night Vision... | Answered on Mar 12, 2009 | 196 views


it is definitely your intensifier tube u may be able to find another one online but good luck replacing it urself :-) if it is still under warranty, send it in.

US Night Vision... | Answered on Oct 24, 2008 | 220 views


Yes, you will need a license to operate as a gunsmith in the United States. However, you won't need a gunsmithing license. As far as I know, no US state requires that gunsmiths have a state-issued license. This means you also won't need to undergo any training or take part in any type of apprenticeship in order to become a gunsmith. You'll become a gunsmith the moment you start claiming to be one.

If you are wondering that type of license gunsmiths need, that'd be a Federal Firearms License (FFL). This type of license is a basic requirement for any business that plans on working with firearms within the United States. To get one, you'll need to fulfill some basic requirements, including going through an interview and an inspection of your future workplace. It's generally not hard to get an FFL.

But again, since this is a general license and not something made for gunsmiths, you won't have to prove yourself a competent gunsmith to get one. You'll just have to show that you understand the basics of gun safety and meet their requirements.

If you'd like to become a gunsmith, this guide can help you get started.

Optics | Answered on Oct 12, 2020 | 16 views


It was made after 1966. If you see on the barrel and if it says Stratford Ct it was made 1970-1980. The current manufacturer does not keep records of the older models.

Optics | Answered on Oct 06, 2020 | 16 views


I this you can find it on https://scopefacts.com/best-rifle-scope-for-deer-hunting/

Optics | Answered on Oct 05, 2020 | 48 views


1. For AHD10, HDA10, HDA30, NVRH5, NVR IH8, NVR IC8 Series:
  • Go to DVR/NVR Main Menu (You may need to log in after this step)
  • Click on Advanced Tab
  • Maintain Tab will appear by default
  • On this screen locate the Load Default option and click on it.
  • Select "All" to factory reset all your DVR/NVR Settings and click on Save (You may need to log in to this step)
  • Your system may restart after this step (Older systems do not restart)
2. For THD Series DVR:

  • Right-click anywhere on the screen and the drop-down menu will appear
  • Click on Main Menu (You may need to log in after this step)
  • Go to Maintenance option
  • Click on Default Sub-tab. On this screen, click on Factory Defaults to restore all parameters to default settings
  • Your system will restart after this step
3. For XHD Series DVR:
  • Right-click anywhere on the screen and the quick launch bar will appear at the bottom of the screen.
  • Click on Main Menu (You may need to log in after this step)
  • Click on Advanced Tab
  • Maintain Tab will appear by default
  • On this screen locate the Load Default option and click on
  • Select All to factory reset all your DVR Settings and click OK
  • Your system will restart after this step
4. For WNVR Series
  • Right-click anywhere on the screen and the quick launch bar will appear at the bottom of the screen.
  • Click on Main Menu (You may need to log in after this step)
  • Go to Maintain Tab
  • Select Factory Default Sub-tab on the left menu
  • On this screen, Select All to factory reset all your NVR Settings and click on Apply
  • Your system will restart after this step

Optics | Answered on Sep 21, 2020 | 15 views


Get a new air rifle with more power?

Optics | Answered on Aug 09, 2020 | 469 views


You have not stated the make of this telescope, but from your description, it appears you have an astronomical telescope (for star-gazing). These scopes generally omit the correction lens in the optical path that inverts the image for terrestrial use. This is because light-gathering power is more important than orientation - after all, there is no 'up or down' in space.

It may be possible to obtain an additional correction lens - check with the manufacturer or seller. If this was not pointed out when you made the purchase, you may be entitled to a refund. Otherwise, just enjoy the Heavens.

Optics | Answered on Jul 20, 2020 | 27 views


Hello, Tanvi -

1. Your question landed in the Fixya category for optics. "Optics" has to do with sight. I doubt that is the correct category for the question.

2. Please explain what "weavers" you are asking about and where (what country.) Are you referring the issue of suicides in the cloth weaving industry in India?

Note: Fixya.com receives questions from people worldwide. Those of us who volunteer to answer on Fixya are not mind readers and cannot guess what is meant by a question without more details.

3. You can add more information regarding your question by choosing Comment and typing added details.

Best wishes.

Optics | Answered on Jun 11, 2020 | 47 views


It may be the year 1967. Because I find greener gun number 79259 was made in 1967.

Optics | Answered on May 15, 2020 | 147 views


Trying to figure out how old my Whirlpool washer is Locate your machine's nameplate, which contains both the model and serial numbers. On top-loading Whirlpool washing machines, open the lid and look for the tag at the top rear of the tub. On front-loading washers, the tag is usually inside the door or near the bottom of the left or right side of the cabinet. If the tag is not in one of those places, pull the machine away from the wall and check the rear. Record the serial number with a pencil and paper or take a photograph. Be sure to record the serial number, not the model number. Decode the serial number at an online source like Appliance Cafe or Appliance 411 (links in Resources). Whirlpool serial numbers include a code in the second character for the year the product was built. Before 1990, the character was a number; from 1990 to 2010 the character was a letter. The number sequence started over in 2011.

Optics | Answered on May 13, 2020 | 131 views


https://www.youtube.com/watch?v=s90HADv-mJk

https://www.ebay.com/itm/NEW-BATTERY-CAP-COVER-SCREW-FOR-BUSHNELL-TOUR-V3-OR-V3-SLOPE-GOLF-RANGEFINDER-/264409429458

Optics | Answered on Mar 13, 2020 | 83 views


Sorry, no. But thanks for asking.

Optics | Answered on Jan 23, 2020 | 104 views


You should know what you paid for it, whatever it is. If you are enquiring about its value, however - Fixya does not do appraisals or valuations

Optics | Answered on Jan 15, 2020 | 105 views


Bottle-shaped cartridges and long barrels cry out for Cordite, shame it is no longer made but research the burn rate and try and match it with a powder...

Optics | Answered on Jan 09, 2020 | 92 views


It's now 2020 - went up on January 1. Didn't you notice the noise ?

Optics | Answered on Jan 09, 2020 | 121 views

Not finding what you are looking for?
US Night Vision D-141M Weapon Sight Logo

Popular Tags

4 questions posted

Ask a Question

Usually answered in minutes!

Top US Night Vision Optics Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

70064 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34565 Answers

Are you an US Night Vision Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...