Amazon.cahttps://www.amazon.ca > Buyers-PB10-Pump-Support...
The Pump Support Bracket Kit from Buyers Products is ideal for Buyers Products C1010 Series pumps and other C style dump pumps. It provides additional support ...
Perhaps this?
4 JBL PB10 Subwoofer Feet Leg eBay
https://www.ebay.com > itm4 JBL PB10 Subwoofer Feet Leg ; Quantity. 1 available ; Item Number. 266108773569 ; Brand. JBL ; Compatible Brand. Universal ; Accurate description. 4.9.US$40.00 · In stock Jbl powerbass pb10 feet
https://www.ebay.com > itm Jbl powerbass pb10 feet ; Item Number. 364173745461 ; Brand. JBL ; Type. feet ; Accurate description. 4.9 ; Reasonable shipping cost. 4.9.US$20.00..
Found here by this thing called Google. It is very new.
https://www.google.com/search?q=pb10+feet
..
These components are meant to be compatible with each other, providing a seamless audio and video experience. Here's how you can connect them:
Connections to the Media Center:a. Soundbar Connection: Connect the Bose Lifestyle 135 soundbar to the MC1 media center using an audio cable. Depending on the available ports on both the soundbar and media center, you might use an optical audio cable, coaxial audio cable, or another appropriate audio cable type.
b. Subwoofer Connection: The Bose Lifestyle 135 subwoofer is a wireless subwoofer, which means it connects wirelessly to the media center. During the initial setup process, the subwoofer should automatically pair with the media center. Follow the instructions in the user manual to ensure proper pairing.
Speaker Setup:
The Bose Lifestyle system, including the MC1 media center, typically uses Bose's ADAPTiQ audio calibration technology. This technology helps optimize the sound based on your room's acoustics and speaker placement. Run the ADAPTiQ calibration process as outlined in the user manual to ensure the best sound quality from your system.
Remote Control:
Ensure that the remote control provided with the Bose MC1 media center is properly programmed to control both the media center and the soundbar. If needed, follow the instructions in the user manual to set up the remote control for seamless operation of all components.
Audio and Video Sources:
Connect your audio and video sources (such as Blu-ray players, cable/satellite boxes, game consoles) to the appropriate inputs on the Bose MC1 media center. This allows you to route both audio and video signals through the media center and enjoy them with the soundbar and subwoofer.
Power On and Configuration:
Power on the Bose MC1 media center and ensure that the soundbar and subwoofer are also powered on. Navigate through the media center's on-screen menus to configure the audio settings, input sources, and any other preferences.
Testing and Adjustment:
Play different types of audio content to test the sound quality from the soundbar and subwoofer. Adjust the volume, bass, and other audio settings to your preference using the remote control and on-screen menus.
Remember to consult the user manuals for both the Bose MC1 media center and the Bose Lifestyle 135 soundbar for detailed setup instructions and troubleshooting tips. If you encounter any difficulties during the setup process, Bose customer support can also provide assistance.
Press the PowerCenter Thermal Circuit Breaker button in to reset. Please allow
10 minutes before attempting to reset.
If you reset too soon, the breaker will
prematurely sense power overload and
not allow unit to operate.
• If the Circuit Breaker continues to trip,
try moving one or more components
to another PowerCenter. You may be drawing
too much current through one PowerCenter
Question edited for clarity and spelling of maker name.
Question moved from Computers.
It is well documented, but there doesn't appear to be a manual online. However, you can buy a new one in the packaging with the manual for $25 or a used one with manual for $13.
https://www.google.com/search?q=Trutech+T160-CD+manual
..
If the signal goes through this chip I really hope it's no smd.
Change out this chip and check the capacitors around it; resistors too.
Have you tried a signal at the beginning of the actual pre-amp on your print? After this chip? Do you have a signal then? If so, it's obvious to be this chip. Succes.
Different online casinos have different policies. You'll have to ask the casino where you have the chips for their policy regarding transferring chips.
"Sounding Bad"? Can you be more specific? Is it crackling, popping, low volume, like it's under water or the sound keeps turning off and on randomly? These can all give clues to the problem.
There could be several reasons why your subwoofer has stopped working on your Norcent 1950 audio system. Here are a few potential causes:
Power issue: Check if the subwoofer is receiving power. Ensure that it is properly plugged into a working power outlet and that any power switches or buttons on the subwoofer are turned on.
Connectivity issue: Verify that the subwoofer is properly connected to the audio system. Ensure that the cables are securely plugged into the correct audio outputs on the Norcent 1950 receiver or amplifier.
Settings and controls: Check the audio settings on your Norcent 1950 system to ensure that the subwoofer output is enabled and properly adjusted. It's possible that the subwoofer level may have been inadvertently lowered or muted.
Defective subwoofer: If none of the above solutions resolve the issue, it's possible that the subwoofer itself may be defective. In this case, you may need to contact Norcent customer support or bring the subwoofer to a professional technician for further diagnosis and repair.
It seems like there might be an issue with the disc recognition or loading mechanism of your Pioneer PD-F805 CD player. Here are a few steps you can try to troubleshoot and potentially resolve the problem:
1. Power cycle: Turn off the CD player, unplug it from the power source, wait for a few minutes, and then plug it back in. This simple reset may help resolve any temporary issues.
2. Check the CDs: Ensure that the CDs you are using are in good condition, free from scratches, and not warped. Sometimes, damaged or irregularly shaped CDs can cause reading errors or problems with the loading mechanism.
3. Clean the player: Use a CD lens cleaner to clean the laser lens of the CD player. Dust or debris on the lens can interfere with the proper reading of CDs and cause incorrect disc recognition.
4. Reset the player: Some CD players have a reset button or a reset procedure mentioned in the user manual. Check the manual for your Pioneer PD-F805 to see if there is a specific reset process you can follow.
5. Check the loading mechanism: Open the CD player and visually inspect the loading mechanism for any loose parts, debris, or obstructions that may be causing the incorrect disc recognition. Gently clean the mechanism if necessary.
6. Lubrication: If you're comfortable with electronics and have experience with repairing devices, you can try lubricating the moving parts of the loading mechanism with a suitable lubricant. Be cautious and use only a small amount of lubricant designed for electronics.
7. Seek professional repair: If the above steps do not resolve the issue, it might be best to consult a professional technician or contact Pioneer's customer support for further assistance. They will have the expertise and specific knowledge to diagnose and repair the problem accurately.
Remember to exercise caution when opening or attempting to repair any electronic device, and if you're not confident in your skills, it's always best to seek professional help to avoid causing further damage.
This might help