Lexmark JetPrinter Z55 InkJet - Page 6 - Answered Questions & Fixed issues

Installation files can be downloaded.

https://bit.ly/2GwirHV

Instructions at http://support.lexmark.com/index?modifiedDate=11%2F21%2F11&page=content&actp=LIST_RECENT&id=TE413&locale=en&userlocale=EN_US may help. basically, disconnect all cables to printer. Unplug printer. go get a cup of your favorite beverage. Plug printer to power. See if it doesn't freeze. you may also need to power-cycle attached computer

Remove Cyan drum and clean the charge roller with a little water

If your Lexmark printer won't process print jobs, you may be encountering one of several issues. If your computer's print spooler service is not working correctly or not started, your Lexmark print is unable to receive print jobs. The printer may need power cycled to clear out the print job data or paper may be jammed within the printer. Click "Start" and "Control Panel." Step Type "Computer Management" in the Control Panel search box. Double-click the icon that appears. Step Click "Services." Click "Print Spooler." Click "Restart" to restart your spooler service. Send your print job again to see if this fixed the problem. If you are having any Kind of problems regarding your printer and have got stuck in resolving these issues then do not worry. Get connected with our Printer Customer Support Number +1 888 597 3962 and resolve all your issues instantly. We have an Expert and experienced team of technical professionals who can serve the best to provide you the best outcome for your queries. https://www.customersupportcare.com/lexmark-printer-support.html

Your machine is most likely is gummed up. the silver shaft that goes through the carriers is sticky, needs to be cleaned. Or motor for carrier needs cleaned, Or both.

I never thought that they will be a miracle on the internet until i came in contact with Priest Babaka, finally i made it with the help with his spiritual power which was recommended by a lady in baby center he help before, i never believe it was real until i confirm it now because i have tried so many things to make sure i get pregnant but no luck, immediately i contact him. he did some spiritual prayers and send me a medicine which i took, i got pregnant three weeks after, and i now have a son to show. thank you so much priest and i recommend Priest Babaka for everyone out there that is willing to have a child of her own out there. contact him for help too he is real and powerful, i have confirmed it, contact him on email: [email protected] or Facebook at priest.babaka

Have you tried printing a test page from the printer (like a setup page WITHOUT using the computer)? If the test/setup page from the pinter is in color then it is the settings or drivers on your (unnamed) computer.

I would refer you to the Lexmark manual for setting up the scan-to-pdf function: http://support.lexmark.com/index?pmv=print&page=content&locale=EN&userlocale=EN_CA&id=SO5227

In my experience you do not scan from the printer to the Mac, rather you perform scan jobs from the Mac: you open the 'printers & scanners' on the Mac, select your printer and then on the right side of the window, click on the "scan" tab, then click on 'open scanner' and proceed. From there you will have options (I don't have a Lexmark) for scanning, saving depending on the features of your scanner. If you do not have the scan option, you may need to update your driver/package on your iMac.

if not used for a while the print head would have dried up.
You can try being it back to life by cleangin the heading with some nail varnish remover and cotton bud.
If this doesn’t work you will need to just buy a new cartridge.

This will help you. The manual for your printer: https://www.manualslib.com/products/Lexmark-Pro915-599456.html

Try this link. It is a similar problem and it gives pictures with instructions.http://support.lexmark.com/index?id=SO5018&locale=EN&segment=support&productcode=lexmark-prevail_pro705&page=content&userlocale=EN

Possible fix in free manual for a Lexmark printer: https://www.manualslib.com/manual/814969/Lexmark-Ms81x.html?page=124 Tray 2 sensors not plugged on or a possible controller board part failure.

Possible steps to try before contacting manufacturer to requestion assistance: http://support.lexmark.com/index?modifiedDate=12%2F15%2F14&page=content&actp=LIST_RECENT&id=SO7609&locale=EN&userlocale=EN_US User manual may be of some assistance, but not specific. https://content.etilize.com/User-Manual/1039091457.pdf

If you have the old cartridge, put it back in the machine and see if you get the same message. If the message changes, then the problem likely has to do with the new cartridge and something being wrong with it.

Ensure that the proper paper size is being used in the ADF.

Are the paper guides on the ADF tray properly adjusted?

Inspect the ADF separator roll and ADF separator pad for wear. If they are worn,

replace them. If they are dirty or have a buildup on them, clean them with a damp

cloth.

If the ADF fails to pick check to make sure that the paper height in the ADF input

tray is beneath the height marker on the ADF paper guides.

Inspect the paper present sensor on the ADF.

• Check the flags on the sensor. Are they able to move freely? If the sensor

flags are damaged, replace the ADF assembly.

Make sure the ADF cable is securely connected to the ADF and the controller

card.

If the cable is properly connected, perform the following checks:

• Check the ADF cable for continuity.

• Check pin 1 on controller card connector J2 for +5V.

• Pin 3 should be ground.

If voltages are present, replace the ADF.

If replacing the ADF does not fix the problem, replace the controller card.

If the ADF is multi feeding, check the ADF pick roller and pad for dirt. Remove

them from the MFP, and clean them with a lint free cloth and isopropyl alcohol.

If the leading edge of the paper is damaged, instruct the user to lessen the

number of documents being copied from the ADF at one time.

If there are excessive misfeeds from the ADF, verify that the ADF paper tray and

extender are properly installed.

Skews and jams at the ADF paper present sensor might be caused by an improperly closed ADF cover. Ensure the ADF cover is closed properly.

Press and hold the Checkmark button and the Right arrow > button while you turn the printer on. Continue holding the buttons, release when the memory countershows, about 10 seconds after bootup. 3. Allow the printer to finish booting up.

To do this:

1. Press Menus button at the lower right-hand corner of the control panel.
2. Open Menus > Settings > General Settings.
3. Scroll down and select Quiet Mode.
4. Select Off and press ?.

Use a pair of tweezers and reach in and pull it out in pieces. If you can grab an edge of it it should come out easier. Also if you can get a Xacto knife in there carefully cut across the roller and then pull out the pieces, careful not to cut into the roller.

http://support.lexmark.com/index?page=content&locale=en&productCode=OPTRA_K_1220&segment=SUPPORT&userlocale=EN_US&id=SO1539