Lexmark X75 MF Black All-In-One InkJet Printer - Answered Questions & Fixed issues
The display reads: the printhead is not supported by the all in one
Please make sure the print head is seating properly as it should.
Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help
Machine will not print
Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy
How do i fix my printer when its says Cartridge error
You likely have a failed ID chip on the cartridge. If you purchased recently and it is OEM I would contact lexmark to complain. They should replace failed cartridges that are not at end of life. If you purchased a reman or 3rd party, go after the vendor.
Fix repeated paper jams on Lexmark 901 Pro
If you are getting a jam and there is no paper visible then a likely cause is a false jam that is caused when the paper is not picked up from the tray at the start of printing. Send a print job and listen closely. If you can hear the pickup rollers turning but no paper is being pulled into the printer then either the rollers are dirty or are worn and need to be replaced. Trying printing from a different tray or the manual feed tray to eliminate a fault with a different component on the printer.
Not finding what you are looking for?