20 Most Recent
Lexmark X4250 All-In-One InkJet Printer - Page 2 Questions & Answers
I don't have disk with me to connect X4250 printer
Go on the Lexmark web site. All printer companies that I know of allow you to download up to date installation software for their printers in the support or support/update areas. It will probably be a very large file so you need a fast internet connection.
What is error 1203
Problem
Error 1203 ; 1203 error message; 1203 cartridge error; Cartridge short error
Solution
Overview
The 1203 error message is caused by either a communication failure between one of the printheads (cartridges) and the All-In-One (AIO), or by a short in one of the printheads.
Resolution
If the problem occurred immediately after the printer was purchased and unpacked from the box, please contact Lexmark Technical Support for assistance.
If the problem is occurring during the normal printer lifetime, the procedures below will help you to resolve it.
Follow the steps located at: http://support.lexmark.com/index?page=content&id=SO3683&actp=search&viewlocale=en_US&userlocale=EN_US&segment=SUPPORT&productCode=&searchid=1254431791878
....let me know if that work for you and please do not forget to rate my service so I am able to continue providing same...god bless
1 thump not related
2 thump related but no recommendation
3 thumps related worked some issues
4 thumps related worked all issues and satisfied
Error 1203 how do I fix it?
try this solution:
================
It's mean your catridges overflow even from brand new catridges after a
several prints or right after you refilled the catridges. Check to see
if ink are smeared on the holder where the contact panel with the
catridge. I have the same problem which I think lexmark have a proble
and overlook.
Solution:
I use the klennex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
The
refill ink work very well if you let it sit 24 hrs. Then before you
print anything, you should run aligned the catridges a couple times
then run clean catridges a couple times.
Print the test page to see how it's look and way you go.
Be sure not to leave any debris of klennex on those holder contact panel.
Too
bad that I also cound not find out how to reset the ink indicator. It's
annoying to hit the OK button every time you want to print.
Try and see if it's work for you. Good luck......
=============
Lexmark won't print whole document
Seems an unlikely solution, but I upgraded from Office 2003 to Office 2007.
As soon as I did this, I was able to print multi page documents. Go figure!
Error 1201 Lexmark x4250
The definition corresponding to this error message is this:
"The
print carrier stopped before all of the data was used." To resolve
this issue, please do the following:
- Power the printer off.
- Remove all cables from the back of the printer.
- Reinsert the power cord.
- Switch the printer back on.
- Check the operator panel to see if the 1201 error message is displayed.
- If the error message returns, the printer could be defective.
Contact Lexmark Customer Support for further troubleshooting and
warranty options.
Thank you
Error 1203
please send me info to solve the problem on my fax
Error 1203
Lexmark all in one x4250
Hi,
I'm not sure what you are asking, but I thought maybe you needed the driver software for the Lexmark X4250 so click on
this link, and choose either XP or Vista from the bottom of the page and download.
Hope this helps
Chris (ziraffa)
Lexmark x4250 mac driver
Hey,
The lexmark drivers and software required for installing the printer is available at www.lexmark.com
Select Drivers & downloads - driver finder
Type in your model x2350 for example
Select your OS version from the drop down list
Download the setup program.
1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done
Thanks,
Ekse
I have an error #1200
methylated spirits on the cloth , turn machine off, and open the cover as you
would do it when replacing cartridge.
make sure machine is turned off so
cartridge will not move to center.
clean the chrome metal bar inside
machine with the methylated spirits - move the cartridge to the other side of
printer manually. and clean the same bar that the cartridge was sitting on.
this should fix the problem.
How do i set the time on a lexmark x464
Usually you need to access the embedded web server on the printer by typing the IP address of the printer into your web browser address bar. This will open a window that will have all the settings available.
Not finding what you are looking for?