20 Most Recent Lexmark JetPrinter Z25 InkJet Color Printer - Page 3 Questions & Answers


I'm using windows XP professional

I didnt got whats wrong with it cause you do not explained anything but the fact that you are using windows xp on 32..so I assume that we are talking about a driver and I will link it just in case this is the issue..
for any other issues like errors on toner change ..or lights blinking ..just verify all the lids to be closed proper..reset button pressed to get rid of any previous jobs and to align proper..and after that power it off..unplug it ..and power it again and keep the button pressed to see if it reset itself ..
for printing issues from the computer just reinstall the driver with this one ..this is teh latest from the manufacturer site for XP..
5/21/2010 11:33:53 PM • Lexmark... • Answered on May 21, 2010

After download driver of priter


What Operating System are you using??
Is it a 32-bit version or a 64-bit version?

I could direct you to the correct driver/software download once you gave me the above required information...

Best regards,
5/21/2010 11:29:12 PM • Lexmark... • Answered on May 21, 2010

Depois de baixar o driver


You can download the driver and software of your printer (Z25 Color Jetprinter) by clicking THIS LINK.
But you should select your operating system correctly on the web page to find and download the compatible driver. Otherwise it does not work properly.

Hope this helps.

Waiting your comments.
5/21/2010 9:17:41 PM • Lexmark... • Answered on May 21, 2010

I don't find Lexmark Z25 driver for windows vista

Support for this model printer ended at Windows XP from the LexMark site. If it does not auto-recognize in Vista, then it is not supported in Vista.

This was a main problem and complaint of people who upgraded to Vista was that many manufacturers did not create support for Vista. We had to replace about 15 printers at a company one time so they could update to Vista.

Sorry I can't help further....
5/3/2010 9:48:42 PM • Lexmark... • Answered on May 03, 2010

Printer problems

Unfortunately, the printer is not compatible with Windows 7 and Windows Vista operating system anymore. The drivers available are for Windows 98, Windows XP, Windows ME, Windows Server 2003 and Windows 2000 only. I Hope I can assist you more on this.
4/19/2010 2:17:43 PM • Lexmark... • Answered on Apr 19, 2010

My computer cd drive doesnt work so i cant install


Go to lexmark website click on the downloads type the model number of the printer into the search bar you will get the link for the download . Download the driver from net and install it
4/13/2010 11:44:52 AM • Lexmark... • Answered on Apr 13, 2010

My print spooler is not running. need help

Hello. Here's an article in the Lexmark website on how to enable the print spooler. Just click on this link to the manufacturer's website: http://bit.ly/chCpeH .
4/12/2010 2:17:59 PM • Lexmark... • Answered on Apr 12, 2010

LexMark Z25 printer driver for windows &

the driver is not available on the manufacturer website . so if possible activate the virtualisation on the windows 7 and then in the xp mode install the printer drivers in the xp mode since the driver is not available

to download xp mode in windows 7
? http://www.microsoft.com/windows/virtual-pc/download.aspx
before installing turn on the virtualisation from the bios(f10)
3/16/2010 7:44:09 AM • Lexmark... • Answered on Mar 16, 2010


Be the first to answer 3/15/2010 2:45:12 AM • Lexmark... • Posted on Mar 15, 2010Be the first to answer

Put away for a few years with the color cartridge

I think your printer can print with only one cartridge. Try removing the color cartridge and see if it works.
3/4/2010 6:07:15 PM • Lexmark... • Answered on Mar 04, 2010

My Lexmark Z25 has been packed away for a few

The blank pages is normally due to dried ink in the print head nozzles. Even by replacing the cartridges, the blockage remain.
You can clean the print head with some wet lint less (camera lens) paper soaked in iso-propyl alcohol.
If the blockage is wet, running a cleaning cycle a few times will normally remove the blockage after doing the above steps.
2/28/2010 3:16:08 PM • Lexmark... • Answered on Feb 28, 2010

Black ink won't print. Color is fine.

Routine maintenance and keeping full ink tanks will prevent this problem, however if you have the problem you can resolve it by doing the following:
1. Clean your print head using denatured alcohol solvent which can be purchased from most hardware stores. If unavailable, use 91% Alcohol (isopropyl alcohol (first aid antiseptic) which is available for less than a dollar at most Walmart pharmacy departments.

*Warning: You may want to use a pair of latex exam gloves as this is a messy process and can stain your fingers.
Time necessary 45-50 minutes
Supplies needed:
Isopropyl Alcohol or denatured alcohol
paper towels
latex gloves
sink, bowls and or basin
can of compressed air
very small screw driver
tablespoon or baby bulb type syringe
warm water

1. Lift print head from printer. It pulls out easily because it is held in with the same down lever that holds the cartridge in place.
2. Put two layers of paper towels in the bottom of a dish to protect sensitive sprayer heads.
3.Put enough solvent in dish to cover the screens on which the cartridges sit when in use.
4. Take the two small screws out that hold the white ceramic piece
5. Gently, pry the ceramic piece back and away , to reveal the underside (No need to pull away the glued points on the sides.)
6. Gently, move head up and down to slosh solvent around it the best as you can. Use a table spoon or syringe to pour solvent over all orifices in the print head, turning it upside down and then back a few times.
7. Use canned air with a plastic straw to blow into and through all orifices, alternately sloshing/swishing and pouring solvent over head (be careful not to touch any of the holes, screens, or sprayer heads with anything)
8. Empty dirty solvent from bowl and replace with paper towels and clean solvent. Soak for approx 10 minutes. Rinse again with clean solvent poured directly on all parts, letting solvent overrun and fall into dish or basin.
9. Gently shake the solvent off the head, take it outside and spray with compressed air into all orifices to clear out and help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a little ink bleeding out of the head, but once it dries completely it does not present any problems.
10. Reinstall head, cartridges and it will print like a new printer.

SUGGESTION: For many years of problem free printing, keep a double set of ink cartridges, one set full at all times. Whenever a cartridge runs out of ink, replace it IMMEDIATELY, with a new one or a refilled one. This gives the print head no chance to dry out and create clogged heads. Routine maintenance of cleaning the heads every 24 months does wonders for keeping your printer in new condition.

Hope this helps. .
2/7/2010 10:05:28 PM • Lexmark... • Answered on Feb 07, 2010

I have a Lexmark z25 printer and just bought a

Lexmark has yet to come out with a Windows 7 driver for your model, and based on the age, probably won't. Lexmark is currently offering a discount if you need to upgrade your printer to a newer model.

All the details are here on their website.

Thank you for using FixYa! - Don't forget to rate our service!
2/2/2010 3:36:04 AM • Lexmark... • Answered on Feb 02, 2010

Dont have cd to install printers software. how do

just go to support.lexmark.com and download drivers from the internet
1/8/2010 12:53:57 AM • Lexmark... • Answered on Jan 08, 2010

Why my printer Z25 Lexmark does not print.

i will upload the manual about your printer and you will able to search the solution after you browse for it in the manuals' section.i am doing this since your question is a blank and needs a lot of check points to be confirmed.thanks for contacting fix ya!!!!
12/31/2009 3:03:21 AM • Lexmark... • Answered on Dec 31, 2009

How can i install a lexmark Z25 if i dont have an

go to the website look in something like support and driver or downloads
12/21/2009 10:47:54 AM • Lexmark... • Answered on Dec 21, 2009

My printer is starting to print half way over,

check drivers and settings via the computer software...
12/18/2009 6:03:33 PM • Lexmark... • Answered on Dec 18, 2009

Lights are flashing and wont't connect to my

The logical board is in conflict, replace it or purchase a new printer.
11/16/2009 2:59:27 AM • Lexmark... • Answered on Nov 16, 2009

Error trouble connecting my laptop to lexmark Z25

install printer driver that is compatible to the operating system.
11/10/2009 4:00:00 PM • Lexmark... • Answered on Nov 10, 2009

I have Windows vista and can't use my printer (Lexmark z35)

Install the driver for the printer which is for Windows Vista.
11/10/2009 2:47:54 PM • Lexmark... • Answered on Nov 10, 2009
Not finding what you are looking for?
Lexmark JetPrinter Z25 InkJet Color Printer Logo

Popular Tags

168 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts


Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6370 Answers

Randy Prevost
Randy Prevost

Level 3 Expert

894 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JetPrinter Lexmark

  • JetPrinter Lexmark

Most Popular Question

lexmark z25 need disk came but will

  • Office Equipment & Supplies