Lexmark X75 All-In-One InkJet Printer - Page 9 - Answered Questions & Fixed issues

http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_652569478_0_en,00.html
Unfortunately, you didn't state which Operating System that you need 64 bit driver for. Hopefully this site will help.

I can't find any vista drivers for the printer.

Go to start->all programs->Lexmark X74-X75->Lexmark X74-X75 Solution centre. 
Then click on the maintenance tab in the far left corner. then, under Select a Maintenance Tool:,
select "align to fix blurry edges. that should fix it.

Here you go!
http://cgi.ebay.com/Lexmark-X74-X75-AC-Printer-Power-Supply-Cable-Adapter_W0QQitemZ230354874029QQcmdZViewItem

Fix this Error - use an advanced registry cleaner for Windows that allows you to safely scan, clean, and repair registry problems with a few simple mouse clicks. Problems with the Windows Registry are a common cause of Windows crashes and error messages. By using PC tune-up utilities such as registry cleaners regularly, your system will be more stable, your software will run quicker, and your operating system will boot faster.
 
http://www.errorfixreviews.org/

Good luck

I want to solution for the printer Samsung ML-2571N.Red led continuously blinking,but selftest is coming,I am sending a printout from my computer,it is errorpage coming.please tell me,what is the problem.

It does not appear that Vista is capable of supporting such an old printer.

I just checked the Lexmark Web Site and I do not see a driver for the X75 under the OS Compatibility guide.

Don

plz check the manufacture website for the drivers

Hi,

I'm going to provide you with a link to the users guide, which should be able to provide you with all f the information you need to access the interior and clear the jam.

http://www.lexmark.com/publications/pdfs/x75/eng/enuser.pdf

Set it in the tray, turn machine on, that print.or copy, it will take in automatically.

try to remove ur driver and then install this one http://www.nodevice.com/driver/X74-X75/get33244.html

Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

When you print a color document do you get any color output ?. You may want to try to print a test color document, consisting of say Red, Green and Blue color blocks. If any of the blocks is missing you may want to replace your color cartridge.

I would check ebay.

It seems there is a possibility of a problem with the printer itself, or perhaps the cartridges. You should first self-test the printer. Since we are unsure where the problem exists, we must do eliminative troubleshooting to rule out parts of the printing system. The self-test allows us to rule out software and the cable by testing the hardware by itself. Please note that this is not a "fix," but rather a diagnostic test to determine if your hardware is at fault.

Please disconnect and then reconnect the power supply on the printer and make sure it makes a setup noise when the cable is reattached. Will the printer perform a form feed with paper loaded when the gray button is pressed?

Next, try this printer self-test by following the steps given below:

1. Turn the printer's "Power" off (metal button).
2. Press and hold the "Paper Feed" (gray) button.
3. While holding the "Paper Feed" button down turn the "Power" button on and hold both buttons until the power light comes on 5-7 seconds.
4. Release both "Power" and "Paper Feed" buttons.
5. The printer should feed a sheet of paper in and print a test page.
The self-test should at least print out a set of either black or color bars, if not both (if you have a printer with both color and black installed simultaneously). Should this test fail, try it again without cartridges installed. If the self-test still fails to take paper in and make sounds like the carrier is moving across the paper, this is a hardware issue, and the printer will require service. If the self-test completes without any cartridges installed, run the self-test again with the color cartridge installed. (If you have both black and color cartridges, after this test, run the test again with just the black cartridge installed.) If you find that either cartridge causes the self-test to fail, please let us know.

If the self-test prints, but has lines or smudges or other print quality issues, please let us know. This includes any print quality issues, we need to know if the problems you have with your black or color are based in the printer, or communications with your computer, or the computer's software.

If the self-test prints your test bar(s) clearly, the printer hardware is not at fault. The issue may be a communication problem, or perhaps a software conflict.

However, please let us know the name and version of the operating system (Windows XP / 2K / NT, Windows Vista, Mac) that you are using on your computer. This information is important for us to troubleshoot the issue further.

No cost!

However, Lexmark only has a driver for Windows XP for this printer.

If that is your operating system, go to:

Lexmark Support

Type your model # in the "Search by Model" box. When it appears click on the gray link or if you miss it click "Search".

Click on the RED link "Need to download a driver?"

The XP driver will be near the bottom. Click on the file name: CJXP75LE.exe.

When the download window opens, select Save and save it to your Desktop. (Note: Depending on your settings, you may have to click on the yellow bar at the top and approve the download since this is an exe file.)

Follow this Setup Sheet to install:

http://www.lexmark.com/publications/pdfs/x75/eng/ensetup.pdf

When it comes time to install the CD, just double-click the file that you downloaded on your Desktop instead.

Thanks for using Fixya.

(Finally, if you have another operating system, Vista, for example, you will need to get a newer model printer, as Lexmark does not support the X75 for it.)

Steve,

Can you try this link and see if it works for you ?.
http://support.lexmark.com:80/perl/support/support.cgi?relevance=0&ccs=229:1:0:111:0:0&mode=DOCS&doctype=KB&term=10.4&docid=ENUS24408

When I had a Lexmark printer last, whenever is inserted a new cartridge I had to go into Printer Setup and tell the printer I had installed a new cartridge...

Most of the Lexmark printers (including the Z- and X- series) pull the paper down on one side slightly faster than the other. The printer hardware should even this out when printing. You should also ensure the paper meets the automatic feeder requirements of the printer.

If printing is skewed, feeding multiple pages or jamming, please follow these instructions (use a regular letter size paper to test after doing the steps given below):

Please check to ensure there is nothing obstructing the paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You should see a conveyor belt with rubber teeth on it, like a fan belt. Take the bottom part of that belt and move it gently to the left. The cartridges should come out with it. Make sure the cartridges can move fully from one side of the printer to the other. Check also the output rollers on the bottom of the printer for any blockage. If it is jamming under the carrier assembly, you may be able to fix it using the manual feed slot. Turn the printer off. Next take a #10 envelope and feed it through the left side of the paper feed slot (The manual paper feed slot is preferred, but the automatic feed will do if there is no manual paper feed for this printer) until it comes completely through the printer to the back of the exit rollers. Move it up and down and slowly move it over to the right side. If something is stuck under the black guide plate this may work it loose or you may have to feed the envelope through the front rollers and push your way backward (please be careful here).

Next, take a damp warm cloth and clean the rubber rollers in the automatic sheet feeder. Dust may be coating the rollers there and as they become less tacky, they cannot feed paper correctly.

Then plug the printer back up, take your paper out and replace it with a fresh, small stack (about 5 pages) of paper. Quickly bend the stack in an 'S' shape a few times to separate pages. Make sure it is lined up on the right side of the paper feed and the paper guide on the left is snug on the left side of the paper. Then try to form feed again. If that works, then try to print the self test page.

Please follow the steps given below to perform the self-test:

1. Make sure the printer is in “Copy Mode.”
2. Press the “Menu” button once.
3. The screen will display “Copy Menu: Copies”.
4. Press the left arrow button once. The screen will display “Copy Menu: Tools”.
5. Press the check button once. The screen with read “Tools: Maintenance”.
6. Press the check button once. The screen with read “Maintenance: Ink Levels”.
7. Press the right arrow button until the screen reads “Maintenance: Print Test Page”.
8. Press the check button once. This will start the Self-Test. Once the page has printed, the printer will stop. The test is not continuous.

The self-test should at least print out a set of either a solid black or solid color bars, if not both (if you have a printer with both color and black installed simultaneously). Should this test fail, please try it again without cartridges installed. If the self-test still fails to take paper in and make sounds like the carrier is moving across the paper, this is a hardware issue, and the printer will require service. If the self-test completes without any cartridges installed, run the self-test again with only a color cartridge installed (If you have both black and color cartridges, after this test, run the test again with just the black cartridge installed). If you find that either cartridge causes the self-test to fail, please let us know.

If the self-test prints, but has lines or smudges or other print quality issues, please let us know. This includes any print quality issues - we need to know if the problems you have with your black or color are based in the printer, or communications with your computer, or the computer's software.

If the self-test prints your test bar(s) clearly, the printer hardware is not at fault.

Go to www.HP.com. You'll be able to download user manuals and access their excellent support solutions troubleshooting..Maybe they can hook you up with a cd as well.