Lexmark T430 Laser Printer - Answered Questions & Fixed issues

It means "put paper in me" A4 is standard 8.5 x 11 paper, available anywhere paper is sold.

Order proper mnfcr part and mark wires w tape to remember what lug they go on and draw a pix

Make sure the power chord is securely plugged in.

Please click on the link provided below. This will show you steps on how to correct the error. http://bitly.com/r09NH8 For further assistance please contact Lexmark Technical Support Center.

We'd like to understand more about the problems you've been having. We don't have a good explanation on the kind of issues that you were experiencing since there was no specific problem indicated.

Please provide us more information and we

If the model number of your printer is T430, this model does not have integrated duplex on paper handling standard, no duplex features.

However, a similar printer model T430d or T430dn has integrated duplex on paper handling standard, it means the printer is capable in printing duplex. Please find the link below to check printer specs for more information.

T430d - http://bit.ly/n65FdK

T430 - http://bit.ly/nWpAzX

To display more information on the specs, just click on the link on the lower right view more spec.

For further assistance, please contact Lexmark Technical Support.

Poor development or poorly charged toner particles cause excessive background. This is more noticeable as the print cartridge nears end of life.

Make sure the print cartridge is correctly installed and the high voltage contacts are clean.
If the cartridge is installed correctly and the problem persists, try a new cartridge. The cartridge may be nearing end-of-life.

For further assistance, please contact Lexmark Technical Support

The Service Fuser Error appears when the fuser does not warm to the required temperature. For this error on this Lexmark model T632, the manual states you should power off the printer and power it back on, and if it is not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, but this is in the manual. If this won't help, and the printer is under warranty, you should log it in with the servicing company.

If the printer is out of warranty, your next option is to change the fuser which costs around $350, so I think you would be better off getting a new printer unless you find a second hand one on Ebay.

You have send a print job from your application (ex. word), and the paper format in this appl. is letter. The printer tells you to insert a letter format paper in the mp (multi purpose) feeder (upper the tray).
If you press the GO key the print probably proceeds with print job (if has the paper load in mp feeder)

1. entra el menu de CONFIG de la impresora. Para hacer esto:

1. enchufa de la impresora.
2. con la impresora enchufada lejos, aprieta y sujeta tanto el boton Selecto como el Regreso abotonan.
3. al mantener ambos estos botones presionaron, enchufan la impresora atras en.
4. cuando la pantalla de impresora dice que MENU de CONFIG o Principal Valor de Cnt, suelte los botones.
2. aprieta el bot?n de Menu de flecha hacia la derecha hasta que vea Repone Maint Cnt (o Repuso Maint a Conde) como una elecci?n.
3. aprieta el boton Selecto una vez. Debe ver Repone Maint Cnt en la l?nea primera y = Repuso en la segunda l?nea de la pantalla de impresora.
4. prensa Selecciona otra vez. Esto repondra al conde de mantenimiento para poner a cero.
5. salir el men? de CONFIG, aprieta el Regreso hasta que regrese en el principal menu.
6. aprieta la izquierda o boton de Menu de flecha de derecha hasta que vea la Salida Config Menu como una eleccion.
7. prensa Selecciona. Esto debe guardar que poniendo y vuelve la impresora al modo Listo. La NOTA: Si usted se pierde durante cualquiera de estos pasos, apriete el boton del Regreso para volver al principal menu. Hacer esto no cambiara ningun ajustes. Alternativamente, puede enchufar lejos la impresora por unos pocos segundos y comenzar otra vez.

Si necessita mas asistencia, permita que sepa. Si esto ayuda o resuelve el asunto, por favor lo valora y da una recomendaci?n para mi respuesta. Gracias, Jose I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Install the driver for Lexmark T430 Laser Printer from the site mentioned below , just remember to select the correct operating system .
http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_T430&page=product&frompage=null#1

A foreign object in the paper path, dirty optical sensor or a part of the mechanic malfunctioning like dirty pickup roller or detached separation claw in the fuser unit.
Check where exactly stops the leading edge of the paper and look for problems on that place.

924 Fuser Error - Open circuit detected in thermistor circuit. The thermistor provides feedback on the temperature of the fuser roller and when it fails, the fuser normally does not heat up.
It means either disassembling the fuser and replacing the thermistor ( if you can find one) or replacing the fuser assembly.
so i would suggest that take it to nearest service centre of lexmark. best of luck

1.change power cable .
2. or check its power supply .(Technical Job)

The fuser needs to be replaced, it is causing your smears and the wrinkling/jamming problem.

error 932 Printhead—lost hsyncs Replace the printhead.

Leading cause of paper jams or misfeed is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

1. Remove the sheets of paper from the feeder.
2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
5. Check the cartridge area for any obstructions in the paper path.
6. Close the printer cover.
7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

The 956.02 error on your Lexmark 792 printer indicates a system board issue. Troubleshoot it step by step: Power off the printer: Turn off the printer and allow it to remain powered off for 10 to 20 seconds before turning it back on. Check the code level: You can identify the current code level using either of the following methods: Method 1: Print the Menu Settings Page: Touch the Menu button on the printer's operator panel. Select Reports. Choose Menu Settings Page to print the page. Look for the code level under Device Information. Method 2: Use the Printer's Embedded Web Server (EWS): Open a web browser (such as Internet Explorer) and enter the printer's IP address. Click on Reports and then select Device Information. Download and install the latest firmware: If your printer's code level matches any of the following: For C792: LHS1.HC.P129 or LHS1.HC.P130 For X792: LHS1.MR.P131, LHS1.MR.P135, or LHS1.MR.P135a For X925: LHS1.HK.P136a Proceed to download and install the latest firmware. If your printer's code level matches any of the following: For C792: LHS1.HC.P131 or later For X792: LHS1.MR.P135b or later For X925: LHS1.HK.P136b or later Contact Lexmark Technical Support for service. Update the firmware: Download the latest firmware from the Lexmark Support website. Save the file and extract it to the same directory. Use the appropriate Authorization Keycode: For Lexmark C792: c792 For Lexmark X792: x792 For Lexmark X925: x925 Update the firmware using one of the following methods: Embedded Web Server (EWS): Open a browser, enter the printer's IP address, and select Settings > Update Firmware. USB utility: Follow the detailed steps for updating via USB flash utility. USB thumb drive: Refer to the steps for updating using a USB thumb or flash drive. FTP: Follow the steps for updating via FTP. If you need further assistance, please contact Lexmark Technical Support. When calling, have your machine/model type and serial number (SN) ready. 956.01 system board error ' Lexmark C792 Error Codes > Lexmark > X792dtse > Code 956.02 (printcopy.info)

If you're looking for a replacement for the IBM Lexmark Wheelwriter 1000, you might consider a typewriter like the Brother M-1000, the Olivetti Studio 45, or the Smith Corona SR8000. These typewriters have similar features and capabilities to the Lexmark 1000, and they're often considered to be good alternatives.