20 Most Recent Lexmark T430 Laser Printer Questions & Answers


It means "put paper in me"
A4 is standard 8.5 x 11 paper, available anywhere paper is sold.

Lexmark T430... | Answered on Apr 28, 2015


Order proper mnfcr part and mark wires w tape to remember what lug they go on and draw a pix

Lexmark T430... | Answered on May 02, 2014


Make sure the power chord is securely plugged in.

Lexmark T430... | Answered on Nov 01, 2013


Please click on the link provided below. This will show you steps on how to correct the error. http://bitly.com/r09NH8 For further assistance please contact Lexmark Technical Support Center.

Lexmark T430... | Answered on Jul 25, 2011


We'd like to understand more about the problems you've been having. We don't have a good explanation on the kind of issues that you were experiencing since there was no specific problem indicated.


Please provide us more information and we

Lexmark T430... | Answered on Jul 20, 2011


If the model number of your printer is T430, this model does not have integrated duplex on paper handling standard, no duplex features.

However, a similar printer model T430d or T430dn has integrated duplex on paper handling standard, it means the printer is capable in printing duplex. Please find the link below to check printer specs for more information.

T430d - http://bit.ly/n65FdK

T430 - http://bit.ly/nWpAzX

To display more information on the specs, just click on the link on the lower right view more spec.

For further assistance, please contact Lexmark Technical Support.

Lexmark T430... | Answered on Jul 20, 2011


Poor development or poorly charged toner particles cause excessive background. This is more noticeable as the print cartridge nears end of life.

Make sure the print cartridge is correctly installed and the high voltage contacts are clean.
If the cartridge is installed correctly and the problem persists, try a new cartridge. The cartridge may be nearing end-of-life.

For further assistance, please contact Lexmark Technical Support

Lexmark T430... | Answered on Jul 20, 2011


The Service Fuser Error appears when the fuser does not warm to the required temperature. For this error on this Lexmark model T632, the manual states you should power off the printer and power it back on, and if it is not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, but this is in the manual. If this won't help, and the printer is under warranty, you should log it in with the servicing company.

If the printer is out of warranty, your next option is to change the fuser which costs around $350, so I think you would be better off getting a new printer unless you find a second hand one on Ebay.

Lexmark T430... | Answered on Feb 24, 2011


You have send a print job from your application (ex. word), and the paper format in this appl. is letter. The printer tells you to insert a letter format paper in the mp (multi purpose) feeder (upper the tray).
If you press the GO key the print probably proceeds with print job (if has the paper load in mp feeder)

Lexmark T430... | Answered on Feb 23, 2011


1. entra el menu de CONFIG de la impresora. Para hacer esto:

1. enchufa de la impresora.
2. con la impresora enchufada lejos, aprieta y sujeta tanto el boton Selecto como el Regreso abotonan.
3. al mantener ambos estos botones presionaron, enchufan la impresora atras en.
4. cuando la pantalla de impresora dice que MENU de CONFIG o Principal Valor de Cnt, suelte los botones.
2. aprieta el bot?n de Menu de flecha hacia la derecha hasta que vea Repone Maint Cnt (o Repuso Maint a Conde) como una elecci?n.
3. aprieta el boton Selecto una vez. Debe ver Repone Maint Cnt en la l?nea primera y = Repuso en la segunda l?nea de la pantalla de impresora.
4. prensa Selecciona otra vez. Esto repondra al conde de mantenimiento para poner a cero.
5. salir el men? de CONFIG, aprieta el Regreso hasta que regrese en el principal menu.
6. aprieta la izquierda o boton de Menu de flecha de derecha hasta que vea la Salida Config Menu como una eleccion.
7. prensa Selecciona. Esto debe guardar que poniendo y vuelve la impresora al modo Listo. La NOTA: Si usted se pierde durante cualquiera de estos pasos, apriete el boton del Regreso para volver al principal menu. Hacer esto no cambiara ningun ajustes. Alternativamente, puede enchufar lejos la impresora por unos pocos segundos y comenzar otra vez.


Si necessita mas asistencia, permita que sepa. Si esto ayuda o resuelve el asunto, por favor lo valora y da una recomendaci?n para mi respuesta. Gracias, Jose

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Lexmark T430... | Answered on Feb 18, 2011


Install the driver for Lexmark T430 Laser Printer from the site mentioned below , just remember to select the correct operating system .
http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_T430&page=product&frompage=null#1

Lexmark T430... | Answered on Feb 16, 2011


A foreign object in the paper path, dirty optical sensor or a part of the mechanic malfunctioning like dirty pickup roller or detached separation claw in the fuser unit.
Check where exactly stops the leading edge of the paper and look for problems on that place.

Lexmark T430... | Answered on Aug 05, 2010


924 Fuser Error - Open circuit detected in thermistor circuit. The thermistor provides feedback on the temperature of the fuser roller and when it fails, the fuser normally does not heat up.
It means either disassembling the fuser and replacing the thermistor ( if you can find one) or replacing the fuser assembly.
so i would suggest that take it to nearest service centre of lexmark. best of luck

Lexmark T430... | Answered on Oct 27, 2009


1.change power cable .
2. or check its power supply .(Technical Job)

Lexmark T430... | Answered on Jun 10, 2009

Not finding what you are looking for?
Lexmark T430 Laser Printer Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

T Lexmark

  • T Lexmark

Most Popular Question

want ask

  • Office Equipment & Supplies
Loading...