20 Most Recent Lexmark C762 Laser Printer - Page 5 Questions & Answers

You are going have to find a retailer that has what your looking for Lexmark constantly updates their printers so most items are no longer available, if there is a computer company close by check with them or check either Amazon or Ebay.

Check the power supply for bad capacitors or take it in for service. https://www.google.com/search?q=Lexmark+6747 ..

this might help https://www.techwalla.com/articles/how-to-reset-a-toner-chip-for-a-lexmark

printer uses USB A to USB B Printer Cable readily available on line less than $10.00

There are no controls on the Output Tray, only on Paper Trays. http://publications.lexmark.com/publications/lexmark_hardware/MS81x/UG/pdf/Lexmark_MS81x_UsersGuide_en.pdf https://www.google.com/search?q=Output+Tray+status+lexmarK ..

http://support.lexmark.com/index?page=content&id=SO3848&locale=en&userlocale=EN_US http://support.lexmark.com/index?userlocale=EN_CA&locale=EN&page=content&segment=SUPPORT&productCode=4039_FAMILY&id=SO1748 https://lexmarkprinters.livejournal.com/6646.html http://support.lexmark.com/index?userlocale=EN_CA&locale=EN&page=content&segment=SUPPORT&productCode=4039_FAMILY&id=SO1748

hi find link https://www.helpowl.com/p/Lexmark/X5630/Research/160781?search=lexmark%20x5630%20ocr%20software

hi find link for video https://infoserve.lexmark.com/ids/idv/video.aspx?category=Multifunction+Products&productCode=Lexmark_XC4140&topic=v34899506&vId=CX725x%2Ffuser_remove&ar=16%3A9&ap=1&l1=4&l2=3&sh=657&sw=1366&loc=en_PH

110% faulty Printhead. Part required is PN: 40x4463
Easy repair, both side panels and top cover removal then just unbolt the Printhead and replace.

could be wrong item or if its a generic it might not work

hi therefirst of all double check that printer is Airprint compatible:http://support.apple.com/kb/ht4356if it is you should be able to print no problemsif it isn't your best bet would be to download a good printing app, i personally use print n share

You did not say what version of windows you are using but the most common fix is to delete the printer and if it asks if you want to delete the driver files say YES. Then reboot the computer and it should reinstall the printer.

Sounds like you need new printhead. Take a look on amazon for replacement, here: Genuine Lexmark 100xl 100 Print Head 14N0700 14N1339 Printhead for Lexmark.... I hope this was helpful, Cheers

For the majority of the Lexmark printers, all that needs to be done is to set the paper size and type the same for each drawer. Example - drawer 1 & 2 sizes are set to letter, drawer 1 & 2 paper types are set to plain. Set up this way, when drawer 1 empties, the printer will automatically switch to drawer 2 to supply the paper.

To reset the maintenance count 1. Turn off the printer 2. Press and hold the 2 and 6 buttons simultaneously. 3. Turn on the printer. 4. Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. 5. Touch Reset Maintenance Counter from the Configuration Menu. 6. Reset Maintenance Counter appears in the header and Yes and No appears below the header. 7. To cancel the reset operation, press Back or No. All other button presses are ignored. 8. To initiate the reset operation, select Yes. The maintenance count resets to zero and the LCD returns to the Configuration Menu

A printhead error indicates that the printer thinks a failure has occurred in the printhead unit. ... If the printer continues to display a Printhead Error message, make sure it is plugged straight to the wall and not through a surge device or power strip.

Lexmark United States Error: "93X Printhead Error"

Videos as well https://www.google.com/search?q=Lexmark+Printhead+Error ..

User's Guide - Printers101

https://www.printers101.com > 2500_ug

PDF The Lexmark Forms Printer 2500 Series printers have control panel overlays available in different ... Resolution of up to 144 x 240 dots per ... 4 Check the network setup page to find the IP Address and the Fully Qualified Domain Name.

Lexmark United States Methods for Identifying the IP Address ...

http://support.lexmark.com > ...

Several methods are outlined as not all printer models offer the same possibilities for identifying their IP address. Procedure. Method 1: Print the Network Settings ... Missing: x ‎' Must include: x

How To Change Ip Address On Lexmark 2500 Series ...

https://www.helpowl.com > Technical-Support > chang...

May 24, 2014 - Find answers below for this question about Lexmark Forms Printer 2500. Need a Lexmark Forms Printer 2500 manual? We have 2 online ...

The old cartridge might have dried up and then nothing would come out of it. Just try to softly clean the tip of the cartridge from where the ink or ink powder moves out and sometimes that might open it and if the inside material is still in good shape it might run.

If it's an All in one, then you have to get a new printer

4 Built-in Card Readers, CompactFlash I & II, SmartMedia Card, MultiMediaCard (MMC), Microdrive, Sony Memory Stick, Memory Stick PRO, Sony Memory Stick Duo (with adapter), Secure Digital (SD) Card, xD Card