20 Most Recent Lexmark C762 Laser Printer Questions & Answers

0helpful
1answer

Lexmark C762 Color laser printer will not boot up, it is plugged directly into a 110 outlet, the cables are seated well, the USB cable is connected to the printer,

If it seems to power on but you don't get anything on display.....you're LVPS (Low Voltage Power Supply) is shot. Needs to be replaced but Lexmark no longer support this model. You might be able to find one from third party parts site.
3/20/2017 3:39:51 AM • Lexmark C762... • Answered on Mar 20, 2017
0answers
0answers
0helpful
1answer

How to replace panel opreator lexmark c7

Please see the attach image for the instructions on how to remove and replace the operator panel of the Lexmark X762.11_7_2012_9_33_23_pm.jpg
11/7/2012 9:33:31 PM • Lexmark C762... • Answered on Nov 07, 2012
0helpful
1answer

Output bin full error flag broke

You need to replace the Output Bin Flag. Please call our Technical Support Hotline on 1-800-539-6275 or contact an Authorized Service Provider near to you (click this link: http://bit.ly/UeQhSB).
9/6/2012 7:42:50 PM • Lexmark C762... • Answered on Sep 06, 2012
0helpful
1answer

How do we clean the rollers?

Please do refer to this link: http://bit.ly/OqwM6c to clean the transfer units. Should you require further assistance, please do not hesitate to contact us on [email protected]
9/6/2012 7:37:33 PM • Lexmark C762... • Answered on Sep 06, 2012
0answers
0helpful
1answer

On my Lexmark C762, I get the 136 Service Fuser

http://www.laserpros.com/pdf/LX-5060-C760-C762-Manual-toc.pdf
Hi, please find above the link for your service manual.
The squeaking noise is most likely dry roller bearings, a little bit of silicone spray judiciously applied to any roller parts will get rid of that usually. it may also be something jamming in the cartridge area so check that too?
Use the troubleshooting procedures to isolate that Fuser error, you may find unfortunately that it is the main Circuit board, also it maybe a sensor you will simply have to check to isolate.

http://www.fixyourownprinter.com/forums/laser/14530
Above is a helpful post about it too...

Below is your users reference manual.
http://www.fixyourownprinter.com/forums/laser/14530
7/1/2011 6:13:57 AM • Lexmark C762... • Answered on Jul 01, 2011
0helpful
1answer

136 Service Fuser Error

your going to need to replace the fuser. is there any abnormal noise?
7/1/2011 5:42:53 AM • Lexmark C762... • Answered on Jul 01, 2011
0helpful
1answer

109 service printhead error

The solution on this Lexmark page may help you :

http://tinyurl.com/635qe59


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

2/21/2011 6:08:22 PM • Lexmark C762... • Answered on Feb 21, 2011
Not finding what you are looking for?
Lexmark C762 Laser Printer Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6358 Answers

Randy Prevost
Randy Prevost

Level 3 Expert

894 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

C Lexmark

  • C Lexmark

Most Popular Question

lexmark c762 get 136 service fuser

  • Office Equipment & Supplies
Loading...