20 Most Recent
Questions & Answers
Lexmark W820 jamming at fuser?
Check to make sure that sensor is plugged in good at the sensor end and the logic board end. The printer uses that sensor to tell it that the paper has exited the fuser correctly, if it does not get a signal within a certain time frame it will give a paper jam error and stop printing. The sensor itself may be broken or the little plastic piece that you can see that is called a flag may be jammed so that it does not move to show paper movement. How far does the flag stick out? It should be about 1/8 inch out in the paper path, if less than that the flag is broken off and will need to be replaced. I hope this helps. If you need more info let me know. If this solves your issue than please rate my solution.
on Jun 17, 2009
**SPAM ** .................................
FixYa Experts: Once you have reached a certain number of answers, then you can Edit and Delete these spam posts too, so they don't victimize unwary users. By my estimate, 4 of your fellow volunteer Experts are currently deleting 5000 or more spams per day, and it's not keeping up with the flood. Please help us out.
on Nov 09, 2019
Not finding what you are looking for?