20 Most Recent Lexmark X7170 All-In-One InkJet Printer Questions & Answers


Is your printer even powering on? Try to remove the power adapter from the printer(small black box behind the printer where the power cord is attached).
printmastert_32.jpg

Before reinserting the power adapter, check if it's warm or cold. It could be a defective power adapter issue. Wait at least 10 seconds before replugging the power adapter. That should give enough time for your printer to reset itself.
Check if your printer is functioning now.

Lexmark X7170... • Answered on Feb 02, 2017


Click menu once and OK 3 times and reply the status of the test print

Lexmark X7170... • Answered on Jan 19, 2016


See link on Lexmark Support site.. This issue requires a software patch easily downloaded from their technical support site.

Here's the link:
http://support.lexmark.com/index?page=content&id=SO4168&actp=search&viewlocale=en_US&userlocale=EN_US&segment=SUPPORT&productCode=&searchid=1287063627491

Lexmark X7170... • Answered on Jan 15, 2016


The 2200 error indicates that the scanner has stalled. Refer to this article 2200 Error on the Lexmark X7100 Series All-In-One to clear the error message and resolve the issue.

Lexmark X7170... • Answered on Jun 04, 2015


go to the lexmark website and download the driver for it

Lexmark X7170... • Answered on Feb 06, 2014


The scanner may be set too dark that an unprinted white page may show up light gray.

Lexmark X7170... • Answered on Apr 05, 2013


remove the colur cartridge and check out that .did you removed the blue tape from its bottom or not,if yes.than its ok.
next option.remove both the cartridges from the printer.now take a dry tissue paper and isoprophyll alcholol liquid also called spirit.this is easily available at medical shops.with the help of both tissue and isoprophyll.clean the brown colur dotted circuit of both colour and black cartridges.the same bron colour dotted circuit is also in the printer exactly at the opposite side where the cartridge is installed.clean that both printers and cartridges circuit,
-------------- THEN , without inserting the cartridges.turn the printer off.from the back of the printer remove the power cord wire and the usb wire.make the printer completely unplugged .then wait for a minute.after that only connect the power cord wire.and on the printer.then ON the printer and insert the cartridges 1 by 1.insert it properly.then close the door and check out if the power button in the printer is blinking or not if its still blinking that means the cartridge is faulty.insert the old colour cartridge in the place of new and check out .and if the printer excepts the old colour cartridge that means the new cartridge is faulty so get it replaced but if the same problem in old colour too then its the problem of black cartridge too that also needs replacing.

this will help.
please do rate the solution.
thank you for using fixya,
keep updated.
thanks.

Lexmark X7170... • Answered on Mar 29, 2013

Not finding what you are looking for?
Lexmark X7170 All-In-One InkJet Printer Logo

377 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6253 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

lexmark x7170 fax from vista when start

  • Office Equipment & Supplies
Loading...