20 Most Recent Lexmark X6150 All-In-One InkJet Printer - Page 4 Questions & Answers

HI there click the link below & get the driver CD.

LINK - - CLICK here

Nice job on checking the cartridges and "ribbon". This article Printer Cartridge Stalls or Is Blocked might give you some more troubleshooting steps that might help resolve the problem. If you've already gone through these steps, I would suggest you contact Lexmark technical support to further investigate the problem. When calling support, you will be asked for the model type and the serial number. Thanks.

Hi

uninstall you printer driver fro myour pc
download from here and reinstall it


In case I had help you pls vote

Lexmark - United States

Hi,

You can download the installation driver from manufacturer's support website by clicking this link

On the page which opens, select the operating system of your computer (Windows Xp/ Vista..) from the drop-down menu. Then download the required driver.

Hope this solves your problem. Thanks for using FixYa

Find the "menu" button on your printers keypad and push it. Use the up and down areas on the printers keypad to advance from choice to choice. Find the option that says something similar to "scan settings" . Push the "ok" button or the "enter" button on your printers keypad to open this option. Continue scrolling with the up and down arrows and using the ok or enter keys on your printer and locate the "scan to" choices. Set up your software choice for scanning text documents and pictures. Most people want to open and edit text documents in software like "Microsoft Office" in your computer. Choose a photo editing software installed in your computer to send pictures scanned on your printer to. When these settings are set and saved, turn on both the computer and printer and try scanning from printer to computer again to check and see if the problem is solved. If you experience any other issues, pleas clarify what they are and I will try and help you solve this right now before I leave for work.

Probably yes with latest drivers from lexmark, get them from the link below.
http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

AS far as the error 50 C is is concerned its a common problem with this printer and lot of user faces this problem, you may try following steps it might help however most of the time it does not get resolved and that's when is the time to buy a new printer cause this problem happens after a particular age of printer.
I would suggest you to follow the following, also i won't ask you to replace the cartridge because you have already did that as you have mentioned plus that would mean extra investment without a surety of fixing the problem.


1. Power off your All-in-One and unplug it.
2. Plug in your All-in-One again and turn it on.
3. Uninstall and then reinstall your cartridges.

Check if the error is fixed or

4. Remove the color print cartridge

and check if the problem is solved else..

5. Reinstall the color cartridge and remove the black print cartridge.


Still if this does not get resolved.There are some good all in one printer that you can go for please try checking wall mart

I would suggest that if the struck up paperr was removed it is owrth a try to use a thicker brand of printing paper so as to reconfirm the benefit off doubt on the machine.
now if the paper is a little thinner than the normal one the roller settings may not fully touch to hold and draw the paper with even pressure. If only one section of the roller is holding then it will tend to draw this side much further than the other side.
So if after changing the paper the fault seems evident, clen the rollers well , remove the drive motor on the side tto disengage the drive , then use your hand to manually turn and see for any foreign particles on the rollers. clean well use some methy spirit to dry wipe off .
Now set the mechanism back and take a test. recheck once again

Make sure the Lexmark is the default printer in printer settings ( in control panel )

If that doesn't help please give some more information about any error codes or flashing lights that appear.

Good luck

Here's an article on How to Change the Date and Time on the LCD Screen of the X6150/X6170 All-In-Ones. Just click on this link: http://bit.ly/aWlheu. Thank you for choosing Lexmark.

The Lexmark X6150 printer is not compatible with Windows 7 OS. However, this printer will work with Windows Vista and Windows XP computer. Here's the link for the driver - http://bit.ly/d43qMR.

Lexmark..............................................................
Did not look very far.............
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_UK&question=+x6150+&productCode=LEXMARK_X6150&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X6150&searchid=1279832440021#2

Here's an article in the Lexmark website on "Cartridge Error 50C" and Other Errors on the Lexmark X5100/X6100 Series LCD Screen. Just click on this link: http://bit.ly/cBu4mW. Follow the instructions carefully. Hope this helps.

Try to delete the jobs which are already pending. Powercycle the printer by taking its power cable off for 30 secs and than plug that back in.

You can look in any electronics shops around your area for the 2-prong power cord. You can also contact Lexmark Technical Support to request for that. They can send you one for free. Just them your contact info and the serial number of your Lexmark printer. Hope this helps.

If you are windows vista home premium user please try this troubleshooting steps.

1) Go to Control Panel
2) Select System and Maintenance
3) Select Administrative Tools
4) Double-click on Services
5) In the list of services, scroll down until you find one called "Print Spooler"
6) Right-click on "Print Spooler" and select "Restart"
7) The "deleted" jobs will disappear and any queued jobs in your print queue will print

RUN a diagnostic test if your printer is connected to your PC , or go the MENU or SETTINGS a do a DEFAULT , SEE IF IT WORKS.