20 Most Recent Lexmark Z715 InkJet Printer Questions & Answers


Maybe that cartridge is low on ink, is faulty or the print head has become clogged? A ggod clean can resolve issues like this. I clean my printer with isopropyl internally on occassion

Lexmark Z715... | Answered on Jun 16, 2015


Try to "computer clean cycle" otherwise new color print cartridge unless there are separate cartridges for three colors.

Lexmark Z715... | Answered on Jun 14, 2015


Some sheets are jammed more tightly than others. Check to locate and remove the less jammed sheets to make it easier to remove the rest. With some printers, it helps to "riffle" the supply first to prevent sticking. You also may have loaded the printer with more sheets than it can handle at one time.

Lexmark Z715... | Answered on Nov 01, 2013


Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.

Lexmark Z715... | Answered on Apr 25, 2013


drivers are here try usin the winxp one and right click it and choose properties and then compatability mode and choose windows xp

Lexmark Z715... | Answered on Feb 14, 2012


If you are encountering power problems with your printer, please go through the following checklist:

  • Make sure the power cord is plugged in securely and directly to the power outlet. Power surge protectors can draw power away from the printer.
  • Disconnect the power cord from the power outlet and the back of the printer and then reconnect it.
  • Check the power supply box (if there is one) to see if it is warm or cold, as there could be a defective power supply issue.
  • If there is access to a voltmeter, test the power supply to ensure that it registering the correct amount of voltage (most Lexmark printers have a 30Volt output).
  • Make sure the correct power supply is connected to the printer.

Lexmark Z715... | Answered on Jan 20, 2012


If you are encountering power problems with your printer, please go through the following checklist:

  • Make sure the power cord is plugged in securely and directly to the power outlet. Power surge protectors can draw power away from the printer.
  • Disconnect the power cord from the power outlet and the back of the printer and then reconnect it.
  • Check the power supply box (if there is one) to see if it is warm or cold, as there could be a defective power supply issue.
  • If there is access to a voltmeter, test the power supply to ensure that it registering the correct amount of voltage (most Lexmark printers have a 30Volt output).
  • Make sure the correct power supply is connected to the printer.

Lexmark Z715... | Answered on Jan 20, 2012


If you go on Google and type in Lexmark Z715 manual you can download a copy of it for free.

Lexmark Z715... | Answered on Nov 21, 2011


Please visit the Lexmark website to download and install the Lexmark Z715 Printer Driver on your computer. Select your operating system > click on FILTER > click on the printer driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen.

I hope this information has been helpful.

Should you still need assistance, please leave a comment to my response and I'll get back to you.

Lexmark Z715... | Answered on Oct 18, 2011


Please visit the Lexmark website to download and install the Lexmark Z715 Printer Driver on your computer. Select your operating system > click on FILTER > click on the printer driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen.
I hope this information has been helpful.
Should you still need assistance, please leave a comment to my response and I'll get back to you.

Lexmark Z715... | Answered on Oct 17, 2011


Please go through the following steps to identify and fix the problem you are experiencing:
  1. Open the printer cover.
  2. Remove the cartridges. Check the cartridge area for any foreign objects or debris blocking the cartridge carrier.
  3. Check behind the cartridge carrier for the encoder strip (transparent strip responsible for the movement of the carrier) and make sure it is seated and not loose in its place.
  4. Close the printer cover.
  5. Unplug / re-plug the printer into the power source to reset it.
  6. When the printer turns on, reinsert one cartridge first. Then close the printer cover.
  7. Check for any errors.
  8. If none, reinsert the other cartridge.
  9. Replace whichever cartridge is causing the error to appear. You may also try to insert a different known working cartridge to identify if it's a faulty cartridge issue.
  10. If cartridges are good and no error appears, try to print a document to verify that the problem is fixed.
If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark Z715... | Answered on Sep 14, 2011


Try to delete the Lexmark Z715 print object from the Print and Fax on your Mac 10.4. Then, add a new Lexmark print object. After successfully adding a print job, try to print a document again to verify that printing is working properly now.

Lexmark Z715... | Answered on Sep 04, 2011


It could be a hardware problem. Please contact Lexmark Technical Support Center for assistance on this matter.

Lexmark Z715... | Answered on Aug 03, 2011


If you're printing B/W. Be sure "print color images in B/W is checked. Worked for me.

Ken

Lexmark Z715... | Answered on May 15, 2011


This article will help you resolve the print quality problem you are describing: How to Resolve a Blurry Print Issue Without Replacing the Cartridge.

Lexmark Z715... | Answered on May 04, 2011


First you need to uninstall it's driver from start menu->control panel->add remove program or program and features if you using vista or win7. Also uninstall all usb drivers from device manager 1 by 1 then it will automatic install all usb drivers .Make sure usb cable is working fine. Download it;s driver from below link then install. Click here Let me know if you need further assistance. Thanks for using FixYa.

Lexmark Z715... | Answered on Apr 11, 2011

Not finding what you are looking for?
Lexmark Z715 InkJet Printer Logo

134 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6163 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Z Lexmark

  • Z Lexmark

Most Popular Question

doesnt print in black

  • Office Equipment & Supplies
Loading...