Lexmark X4270 All-In-One InkJet Printer - Answered Questions & Fixed issues

Does your old equipment have a different operating system? If it does, you need to get the driver for your new system.

Try this page.

Try checking the ink cartridges and make sure they have ink in them or it will keep printing blank pages. Then try printing a test page by going to control panel, clicking on printers and faxes and right clicking on your printer and going to properties. Then go all the way down to the bottom of the page and click print test page. It will clean the printer cartridges and align them to print correctly. It should work after that.

typically faxing doesn't work on VOIP. i tried many times and sometimes it would go through although it said it didn't. other times it didn't work at all. VOIP has a limited bandwidth and the fax needs to send more info over the line than VOIP makes room for.

to have the best luck, stop all downloads and other network traffic while attempting to fax, so that there are no other programs or devices using the internet. the fax will have its best chance of working that way, although it probably still won't

here are some very good tips as well:
http://chris.pirillo.com/how-to-fax-over-voip-on-the-internet/

To download the manual for Lexmark X4270, please click the link below:

Lexmark X4270 Manual

Thank you

Here is the link to Lexmark's website for this printer.

http://www.lexmark.com/publications/pdfs/2007/4200/en.html

Don

I would look for a dusty LED or sensor. They're used to let the printhead to find its position. Once cleaned the head should align properly.

not sure if this link will help you out but have a look. Lexmark x4270 not printing Google Search

you should buy a new printer

Try to clear the memory of the or the printer is in fax mode please choose copy or scan mode

You may be out of ink, or communications between the computer and printer could be malfunctioning.

You can run your lexmark cd installer again and select custom installation and click on install additional software,, now make sure that you are going to put checks on the boxes especially your abby finereader

If you dont have the cd you can check this link

http://www.mydigitallife.info/2008/02/01/free-ocr-software-program-download-simpleocr/

You may download the Lexmark software and drivers from http://support.lexmark.com/index?productCode=LEXMARK_X5650&page=product&searchid=1393917850818&locale=EN&userlocale=EN_US#1

Hi
Not sure if you not got the manual.
I have put a PDF files on my website for you to download.

Just click on the links it will download for you.
It got all you need to know in this file.
You can read it on site and print it strait off the website or save it to your PC then print it out.

Click LINK= http://www.4all2sell.com/pdf/Lexmark X4270-Manual.pdf

You will need a adobe reader to see this file If you not got an Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Contact Lexmark at 1-800-539-6275!!!!! Good Luck!!!!! Good Luck!!!!!

click on start ..RUN.....type cmd......type sc config spooler depend= RPCSS......click on start ..RUN......type services.msc.......look for ptrint spooler......it will be started if not then double click on print spooler and click on start.

Now try installing the printer.

Make sure that you're using genuine Lexmark cartridges. Also, check if the firmware of your printer is up to date. Just go to http://bit.ly/ghfW8H to download the firmware update.Performing a maintenance on the cartridges would also help. To do that, on the control panel of your printer, press on Setup > Maintenance > Deep Clean Printhead.

You may download the driver from here.

I have to be quite honest I am still suprised the problem here is still not as published as it should be. The problem you are having is with Windows XP, more notably Service Pack 2. It is not a particular device problem, but rather a general communications problem between specific XP components which was due to XPs new security center.The fixes are mostly passed around on sites related to networking, because the biggest issue is a "NO CONNECTIVITY" error it produces with certain network adapters. If you search around the web you'll find several fixes. Apply them all followed by Microsoft's TCP/IP (Winsock) patch and you should be up to snuff. I suffered the same problem with my Lexmark as well as my Networking when I upgraded to SP2. Which I may add ticked me off alot. However, luckily I addressed the networking first. Because that in itself fixed the printer as well.Hope you guys have a great week.WalterBarterPC Computer ConsultingJersey City, NJ

is it making clunking noises when it tries to pull the ink cartridges to the middle? Or grinding noises?

You may view the manual here.