20 Most Recent Lexmark X4270 All-In-One InkJet Printer - Page 8 Questions & Answers

You can download the Lexmark X4850 driver by visiting the Lexmark website at http://bit.ly/lY7NTO. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

The 1200 error indicates that either the cartridge/s is not properly installed or snapped in the cartridge carrier, the encoder strip (transparent strip behind the cartridge carrier) is out of place or something is blocking the cartridge carrier's path. This article 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One will help you identify and resolve the issue.

The 1200 error indicates that either the cartridge/s is not properly installed or snapped in the cartridge carrier, the encoder strip (transparent strip behind the cartridge carrier) is out of place or something is blocking the cartridge carrier's path. This article 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One will help you identify and resolve the issue.

It could be that your cartridge needs some cleaning or the cartridge is not seated properly in the carrier. Open the printer cover. Remove the cartridge and wipe the cartridge nozzles with a moistened soft cloth to clean it from dirts and clogs. Close the printer cover. Unplug and replug the printer into the power outlet in the wall to reset it. When the printer turns on, reinsert the black cartridge and make sure it's properly inserted.

The 1200 error could be caused by a cartridge not properly inserted in the carrier, encoder strip got unseated from its position or there's something blocking the cartridge carrier path. Try to refer to this article in the Lexmark website to determine what's causing this and resolve the problem: 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One.

This article in the Lexmark website has some visual aids that can better guide you on how to reseat the encoder strip (long clear stripe) in your printer: Printer Cartridge Stalls or Is Blocked.

Hello.

You don't need a scanner code (pin ?) to scan. Here are the steps from Lexmark Support:

Step Action 1 Make sure the printer is configured to scan over a network. 2 Load an original document face down on the scanner glass. 3
From the control panel, press or repeatedly until Scan is highlighted. 4
Press . 5
Press or repeatedly until the computer you want to scan to is highlighted. 6
Press . 7
If you set a PIN during network setup and are being prompted for it:

1. Enter the PIN using and to select a digit location and using and to select a value for that digit.


2. Press .

8
Wait until the printer has finished downloading the scan applications list. 9
Make your selections using the control panel buttons. 10
Press the green Start button ().

Hope this helps.

Your computer has no diver for Win 7 the only way you can used it succeessfully is for win XP
because lexmark stopeed creating the driver for that kind of printer ...

Hope it help thanks

See the manufacturer's web-site: http://support.lexmark.com
and enter the model-number, and do the search.
You should find "trouble-shooting guides" and "manuals" for the specific model, as downloadable PDF files.

If you have an internet connection then you can download it at http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_F4270&focusedTab=DOWNLOADS#2

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X4270&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Hi,

This is the problem with movement of cartridges of the printer. If this error code showing in your printer then cartridge will not move properly. To solve this type of problem first turn the machine off, and open the cover as you would do it when replacing cartridge. Make sure machine is turned off so cartridge will not move to centre. Then clean the chrome metal bar inside machine with the methylated spirits - move the cartridge to the other side of printer manually, and clean the same bar that the cartridge was sitting on. Then give a print job.

The 1203 error indicates a problem in either one of your cartridges or between one of the cartridges and the printer. This article will help you determine the cause of the problem and how to resolve it: How to Troubleshoot a 1203 Error on the Lexmark X4250/X4270/F4270 Printers.

The 1203 error indicates there is a problem with one of the cartridges. You may refer to this article to determine the cause of the problem and find a resolution: How to Troubleshoot a 1203 Error on the Lexmark X4250/X4270/F4270 Printers.

It could be that your black cartridge needs cleaning. On your printer operator panel, press Options -> Maintenance -> Clean Cartridges. Your printer will then print a test page forcing ink through your cartridge nozzles. Try to print your document again to check if black cartridge is working now. If not, you could try to insert a different known working cartridge to determine if the other is faulty.

1203 error indicates a communication problem with your printer and one of your cartridges. Please refer to this article in the Lexmark website: How to Troubleshoot a 1203 Error on the Lexmark X4250/X4270/F4270 Printers. This will help you identify and resolve the 1203 error message on your printer.

These articles in the Lexmark website will help you identify and fix your problem with sending faxes using your Lexmark X4270: Problems Sending a Fax to Specific Fax Machines and Main Contributing Factors to a Fax Send Failure on an Inkjet All-In-One (AIO).
I hope these information has been helpful.

Este artigo no site da Lexmark vai ajuda-lo a identificar e corrigir a mensagem de erro1200 na sua impressora: 1200 Mensagem de erro em um X4250/X4270/F4270 Lexmark All-In-One
(Nota: Esta e traduzido usando http://translate.google.com.)

This article in the Lexmark website might give you an idea on how to scan to email using your Lexmark X4270: How to Scan with the Lexmark X4250 / X4270

Hi there, ehoward3.

You would need to revisit the configuration of your device, most especially the way it behaves whether its in "Automatic" or "Manual" fax reception mode. The latter is highly recommended if this AIO printer is sharing both fax and phone lines.

I have included the link which will thoroughly guide you through the process of setting up this AIO printer and how it should behave in accordance to your liking :

Lexmark Support

This guide has a very detailed step by step procedure, and is guaranteed for your ultimate guidance and for your future reference.

I hope this helps, Thanks for using Fixya.