20 Most Recent Lexmark P6250 All-In-One InkJet Photo Printer - Page 2 Questions & Answers

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

This printer does not support wireless printing.
Regards
GM

printer will print color but not black and black is full

Erro 1203 solution

1. open the front cover of the printer
2. wait for the cartridge carrier to be in the center..
3. remove the mono and color cartridge or printhead
4. clean the gold connectors or circuit on the printhead
next: power off the printer while the front cover is open .
5. then clean the printer cartridges carrier circuit ..especially those gold connectors....and reinstall the printhead or cartidges..
6. close the front cover and power up the printer..

Good Luck!

check the paper exit sensor it may be actuated permanently

Please install again the software and get it here : www.nodevice.com/driver/company/Lexmark/Printer.html
www.lexmark.com/
www.driverslab.com/drivers/Printer/Lexmark/9/63.html

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link
and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Any major brand will have free downloads on their website; I always check there first. It's also preferred since there will be the newest versions too. Unfortunately, some sites are better than others to navigate however.

The blinking light normally means something like paper out, ink out, paper jam, printhead needs replacing etc..

You should be able to find your driver, software and manuals here:

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_P6250&segment=SUPPORT&userlocale=EN_US&frompage=null#1

Trust this is helpful. Please vote.

I assume you are looking for drivers. if yes you can get it here.


let me know if you need more helps
please help to rate me if you think this is useful

Find the drivers on this Lexmark link:
http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_P6250&focusedTab=DOWNLOADS#1

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Check the scanner glass for dirt, or debris from previous scans. Smoke on mirrors, dust all contribute. Dont use canned air.

This is a scanner error. You could try the following...
Power off and remove the power supply(Power Cord) from the back of the unit.
Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid.
Open the top cover
Using the carrier belt, move the cartridge carrier to the middle of the unit.
Remove both cartridges, close the top cover, reinsert the power supply, and power on.
IF THE ERROR MESSAGE DID NOT COME BACK....
Power off and remove the power supply from the back of the unit.
Open the top cover
Using the carrier belt, move the cartridge carrier to the middle of the unit.
INSERT THE COLOR CARTRIDGE ONLY,
Close the top cover, reinsert the power supply, and power on
IF THE ERROR MESSAGE RETURNS.. GET A DIFFERENT COLOR CARTRIDGE AND REPEAT THIS PROCESS....
IF THE ERROR MESSAGE IS GONE,
Power down as before, do all the same to get the carrier to the middle of the unit and RE-INSTALL THE BLACK CARTRIDGE.
Power back up as in previous steps...
NO ERROR? SHOULD BE GOOD TO GO..
ERROR?? TRY DIFFERENT BLACK
If after trying all of the above and the error message does not go away, you unit would need serviced (if it's under warranty, it's worth it; if not, you might want to replace it.)

hi

here is what i have found -- follow to all instructions accordingly
although its for another model, these isntructions apply according t their techsupport i spoke with


.Power off the All-In-One (AIO) and remove the power supply from the back of the unit. Wait 30 seconds. Then reinsert the power supply and power the AIO on.
Did the error message return?

Yes: Continue to step 2.
No: Attempt a test scan. If the error message does not reappear, the error is resolved.

2.
Power off the AIO and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove both cartridges, close the top cover, reinsert the power supply, and power the AIO on.
Did the error message return?

Yes: Continue to Contacting Lexmark.
No: Continue to step 3.

3.
Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Insert the color cartridge, close the top cover, reinsert the power supply, and power on the AIO.
Did the error message return?

Yes: Repeat step 3 with another color cartridge. If the printer fails again, continue to step 4.
No: Repeat step 3 and install the black/photo cartridge. If both cartridges are installed, attempt a test scan. If the error message does not reappear, the error is resolved.

4.
Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove the color cartridge and insert the black/photo cartridge. Then close the top cover, reinsert the power supply, and power the AIO on.
Did the error message return?

Yes: Repeat step 4 with another black/photo cartridge. If the printer fails again, continue to Contacting Lexmark.
No: Install the color cartridge. If the printer fails, continue to Contacting Lexmark. If the error message does not appear with both cartridges installed, attempt a test scan. If the error message does not reappear, the error is resolved.

here is where i found the error http://support.lexmark.com/index?page=answers&startover=y&locale=en&userlocale=EN_US&question=2200 error#1

hope this helps -- God's speed

You can download the Lexmark P6250 driver from the Lexmark website for free. Just click on this link Lexmark P6250 Drivers. Select the operating system of your computer by clicking on "change OS" (see image below)


Then click on "FILTER" (see image below)


Click on the driver under "Recommended Downloads". Download and install the file. Follow the instructions in the software.
If you need additional assistance, feel free to contact Lexmark technical support. Thanks.

Try to use the Lexmark P6250 driver from the Lexmark website at http://bit.ly/9GDVnj. Select your operating system (if needed) by clicking on "change OS". (see image below)


Then click on "FILTER". (see image below)


Click on the driver under "Recommended Downloads". Download and install the file. Follow the instructions in the software.
Hope you'll be able to successfully reinstall the printer software using this downloaded driver. If problem continues, please contact Lexmark technical support to further investigate this problem. Thanks.

unplug the power pack in back for 30 seconds power back on an should work.

You should contact Lexmark technical support for assistance with the power adapter. Thanks.