Top 20
Sharp HE CDDH950P Mini System Questions & Answers
Cd tray will not open er cd11 code
Just talked to customer service at Sharp because I had same problem with my CD trays getting stuck and would not open even if they had cd's in them. He walked me through resetting the cd system. First have unit plugged in but in standby/off. Then press the open/close button, the stop button and the CD button all at one time(beside holding unit still to keep from sliding) till the display flashes CLEAR ALL and then let go and turn unit on and see if it solves your problem. It solved mine but I did write down instructions to make sure if it happens again I can use it again. Good luck, Helen
1/3/2014 10:39:55 PM •
Sharp HE...
•
2,265 views • 0 helpful votes
Sharp model GX-CD 610 GY has error 000 what does error 000 mean
The basic binary errors are usually something small. 0000 is usually a cleaning error. I would try to clean the lens with the recommended cleaner and then try again. If problem persists the lens may be saying its dirty due to a scratch on it. These are hard to diagnose because it's a process to remove. I would clean it then replace the lens if needed.
Sharp CD 1700protect Error
Other than unpluggingfrom the mains (if haven't been tried) for an extended period of time (say overnight), there are no reset procedures applicable to this CD shelf system. The idea is to force the unit to revert back to factory defaults.
Almost always, a faulty speaker/connection would short out the output stages hence the 'PROTECT' error message. The only time this messge would be gone is when the built-in diagnostics no longer senses the fault, i.e. after it has been repaired.Sorry.
Not finding what you are looking for?