20 Most Recent Integra Dtr-7.8 Receiver Questions & Answers


They will be value of 10 ohms or less in the secondary power supply attached to the front assembly

Integra Dtr-7.8... | Answered on Dec 15, 2015


The bad resistor is on the ps board that drives the display, well on mine at least. The resistor is supposed to be 10 ohms at 1/8 watt "i think" i replaced it with a 1/2 watt resistor. Either way its R9310. the board is right behind the display on the right side just behind the volume knob. when open and looking from the back you see it just fine. it's not hard to get out. fairly simple to fix. integra-7-8-display-bad-otccdugj0mk41z1tpuysbqy4-5-0.jpg integra-7-8-display-bad-otccdugj0mk41z1tpuysbqy4-5-2.jpg

Integra Dtr-7.8... | Answered on Nov 10, 2014


http://www.integrahometheater.com/faqs.php Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Integra Audio... | Answered on Jul 03, 2018


You have a defective processor pcb assembly and it must be changed.

Integra Audio... | Answered on Feb 19, 2015

Not finding what you are looking for?
Integra Dtr-7.8 Receiver Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76360 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

301 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Integra Audio Players & Recorders

  • Integra Audio Players & Recorders

Most Popular Question

fix integra 7 8 display dead

  • Audio Players & Recorders
Loading...