Top 20 Integra DTR 5.6 Multi Media Amp Questions & Answers

reset receiver if that does not work You will have a defective processor pcb

Integra DTR 5.6... | 283 views | 0 helpful votes Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Integra Audio... | 1,101 views | 0 helpful votes

You have a defective processor pcb assembly and it must be changed.

Integra Audio... | 1,943 views | 0 helpful votes

You will have bad output transistors, a $124 to 150 repair in shop service

Integra Audio... | 180 views | 0 helpful votes

Your DTR-7.8 receiver is not 3D compatible. It does not support the new 1.4 HDMI. You have to have 1.4 HDMI and 1.4 cables for the 3D format.

You can bypass your receiver for the video though. Simply run your HDMI cord (1.4) from your Blue Ray to your Projector. Your audio can be ran from your Blue ray to your reciever.

Integra Audio... | 339 views | 1 helpful votes

Does this normally happen if you press a few buttons or settings faster in succession? If so then maybe the receiver can't keep up with multitasking or what you would call processing power so maybe just try to not select functions as fast and give it a few seconds in between changing settings before switching to another. my cellphone and receiver will also do this because of lower quality components used in manufacturing. A lot of company's now days to compete with price points are cutting corners so certain components are lacking to keep up with demand of other components in the system.

Integra Audio... | 388 views | 0 helpful votes

obviously a short somewhere in the system....

you know what i would do?
pray to god you are still under warranty! XD
its a beautiful machine....

Integra Audio... | 342 views | 0 helpful votes

Swap your left and right rear speaker over. If you still get no sound from the right speaker connected to the left speaker connection on the receiver, then you have a fault on the receiver output. Check your manual first to see if any setting switch off the rear speaker before taking the unit for repair or replace

Integra Audio... | 502 views | 0 helpful votes

Hi and welcome to FixYa,

Initially, postback with the model number of the Integra receiver, something like DTR-80.1.

Offhand, have you tried connecting analog, red & white (left & right)?

Good luck and thank you for asking FixYa.

Integra Audio... | 74 views | 0 helpful votes

No, I don't think there is a motor that is supposed to turn the volume - I think the volume is a push button type with one button to increase and another for down that is pushed by a clever rotary mechanism or if it isn't exactly like that the principle is probably a similar use of pure electronics.

It is clear the link between the infrared receiver and decoder and the volume electronics is broken and it will probably need a service engineer to discover where and effect a repair.

Audio Players &... | 19 views | 0 helpful votes

Does it turn off?

Audio Players &... | 19 views | 0 helpful votes

You can't. You bought a set of wireless speakers with no way to connect them to anything. Communication is don'e from the base station. You need to buy another complete.

iLive Speaker System IS809B User Guide ' > ... > iLive Speaker System
Audio manuals and audio service pdf instructions. Find the user manual you need for your audio device and more at ManualsOnline.

ILIVE S809B Wireless Outdoor Speaker for ... - > S809B-Wireless-Outdoor-Speaker-...
ILIVE S809B Wireless Outdoor Speaker for IS809B · Brand: iLive · Only 1 left in stock - order soon. · Arrives: Jan 12 - 15 Fastest delivery: Tuesday, Jan 12 · Product ...

iLive Model S809B Black Wireless Speaker Docking System ... > ... > Home Speakers & Subwoofers
iLive (S809B) Indoor / Outdoor Replacement Single Black Speaker Only. Condition is Used. See details. Watch. Sold byomahasurplus (15210)99.9% Positive feedback Contact seller. Rating: 3 · ‎2 reviews · ‎US$20.99 to US$37.01 · ‎In stock

Audio Players &... | 16 views | 0 helpful votes

I think that both the fuses and the speakers are not working and need to be replaced or repaired.It would be more cheaper to buy a new ADS MS 3 than to fix the one that you have.

Audio Players &... | 17 views | 0 helpful votes

Those buttons are a silicon rubber covered with a carbon film. In many cases the film comes off the rubber and cannot complete the task of changing the current flow. To check this the unit has to be disassembled and inspected.

Audio Players &... | 18 views | 0 helpful votes

Configuration is most likely.

Audio Players &... | 15 views | 0 helpful votes

Not finding what you are looking for?
Integra DTR 5.6 Multi Media Amp Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Bill DiBrino

Level 1 Expert

11 Answers

Naheed Mir

Level 2 Expert

166 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Integra Audio Players & Recorders

  • Integra Audio Players & Recorders

Most Popular Question

integra dtr 5 6 no sound am fm tuner

  • Audio Players & Recorders