20 Most Recent BenQ DC C40 Digital Camera Questions & Answers

Most consumer camera have lenses that are too small to let enough light in dark situations. The only thing you can really do is try to light up what you are filming more, or buy a camera with a better lens and higher aperture rating.

BenQ DC C40... | Answered on Mar 22, 2009

the first, try to use recharchale batteries, some over 2000mAh, because it´s pretty normal for digital cameras to drain quikley batteries, the second, isn´t normal have u changed the photo quality???, if not try to format the card in a pc and after in the camera.

BenQ DC C40... | Answered on Apr 08, 2008

Hi Beshoui,
I believe your zoom lens is not extending when you power on. In most cases like this, there is likely a foreign body (sand) or similar objects lodged between the lens tubes or the camera has been subjected to a knock (dropped, bumped against a solid surface) that caused the lens tube to miss-align. All you need to do is:
1. as you switch on the camera, give a little knock/ tapping with your fingers around the lens.
2. if that fails, apply a little pressure to the sides of the lens ring while powering on your camera.

Lets hope that will help to dislodge the foreign body or the lens tube miss-alignment.

BenQ Cameras | Answered on Feb 08, 2016

When an electronic device is start acting strange, a software update is the worst thing you can try to solve the problem.

Updates are only allowed if the system is working without an error.
If it is not working correct, you can't be sure it will load the update correct and you never know what happens when the update is started.
For every update there is a condition, the electronic needs to work perfect and the battery / power supply must be capable of delivering enough power during the whole update process.
I'm sure there will be no update for the Benq camera.

BenQ Cameras | Answered on Jul 27, 2014

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

BenQ Cameras | Answered on May 13, 2014

Always when your camera acts strange, switch it off. Wait a few seconds, till you are sure it is not accessing the memory anymore. Then remove the battery (ies). If possible first charge the battery (ies) Than replace the battery and switch on the camera. If the error comes back, you have to assume something serious is going on. In which you should contact a service centre or repair shop.

BenQ Cameras | Answered on Jan 29, 2014

remove the batteries for 24 hours and the camera should reset itself.

BenQ Cameras | Answered on Sep 23, 2012

Not finding what you are looking for?
BenQ DC C40 Digital Camera Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top BenQ Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

315 Answers

Are you a BenQ Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

BenQ Cameras

  • BenQ Cameras

Most Popular Question

bad dark video in low light

  • Cameras