Top 20 BenQ DC C30 Digital Camera Questions & Answers


Hi Beshoui,
I believe your zoom lens is not extending when you power on. In most cases like this, there is likely a foreign body (sand) or similar objects lodged between the lens tubes or the camera has been subjected to a knock (dropped, bumped against a solid surface) that caused the lens tube to miss-align. All you need to do is:
1. as you switch on the camera, give a little knock/ tapping with your fingers around the lens.
2. if that fails, apply a little pressure to the sides of the lens ring while powering on your camera.

Lets hope that will help to dislodge the foreign body or the lens tube miss-alignment.

BenQ Cameras | 51 views | 0 helpful votes


Please.
When an electronic device is start acting strange, a software update is the worst thing you can try to solve the problem.

Updates are only allowed if the system is working without an error.
If it is not working correct, you can't be sure it will load the update correct and you never know what happens when the update is started.
For every update there is a condition, the electronic needs to work perfect and the battery / power supply must be capable of delivering enough power during the whole update process.
I'm sure there will be no update for the Benq camera.

BenQ Cameras | 76 views | 0 helpful votes


SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

BenQ Cameras | 28 views | 0 helpful votes


Always when your camera acts strange, switch it off. Wait a few seconds, till you are sure it is not accessing the memory anymore. Then remove the battery (ies). If possible first charge the battery (ies) Than replace the battery and switch on the camera. If the error comes back, you have to assume something serious is going on. In which you should contact a service centre or repair shop.

BenQ Cameras | 40 views | 0 helpful votes


SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

BenQ Cameras | 74 views | 1 helpful votes


English please

BenQ Cameras | 126 views | 0 helpful votes


Make sure the card is not locked. Move the slide switch on the side of the card back and forth a couple of times ending with unlocked. Let me know the results.

BenQ Cameras | 275 views | 1 helpful votes


Hi, the issue is with Batteries. Please replace the Batteries of same specification in order to use the Digital Camera. The Photos in the Memory Card is powered by USB as the Power Source from your Computer and not your Camera's Batteries. So please replace the batteries with new one.

BenQ Cameras | 181 views | 0 helpful votes


You need SDHC card or higher up to 32 G

BenQ Cameras | 433 views | 0 helpful votes


Install the Software of your camera in the your laptop by using the CD which came with your camera...after that whenever you will connect this will work finely...

BenQ Cameras | 92 views | 0 helpful votes


I need a software driver vivitar vivicam 55 please!!

BenQ Cameras | 405 views | 2 helpful votes


At boot up press F2 to enter the BIOS. That is where the change has to be registered for your PC to recognize the new HDD. So when you get the first meny there you will find the HDD. If not, then auto detect the HDD. Within a second or two your new HDD will be recognized. Also from the back of the new HDD. ie, the Seagate, check if the Seagate is the master. If not, then you will find a diagram there which tells you how to change the jumper so that your HDD will behave as master. And I hope you are not using the other HDD as well?

BenQ Cameras | 53 views | 0 helpful votes


remove the batteries for 24 hours and the camera should reset itself.

BenQ Cameras | 165 views | 1 helpful votes


I have not used the trial version of Word 2007 before, but I am assuming that it's the fact it is a trial version it will not let you edit a previously saved Word doc.
What are the indicators/messages about not being able to edit the file. If a message pops up can you post it here verbatim.
Does the file contain a lot of formating - ie, the text has different fonts and sizes for headings and subheads and there are bullet pionts and graphics etc?? If not, are you able to copy all the text off the page and paste it onto another file and save that file - maybe as a text-only file with an extension ".txt". By doing this, you will be able to place that text, in an editable form, into nearly any application that supports text, including the full working "FREE" program OpenOffice.
Please let me know what you think of this and if there is more that we need to do to help you.

**.The best way to acknowledge contribution is to rate it's relevance.**

BenQ Cameras | 286 views | 0 helpful votes


hi there

you don't need a driver
just connect it
turn it on
open my computer on your desktop
look for an icon or hard drive that wasn't there before
double click it
inside there will be 2 or 3 folders
one of them will have your pics in
copy and paste them wherever you want

hope this helps

beergut707

BenQ Cameras | 89 views | 0 helpful votes


sir..i hav digit camera benq dc E800.when i start my cam it will displayed as black screen without light..if i take photo or vdo ,after took it shows with dim light and mixed with violet colour..plzz say whats the reasons and it can solve..where i want to go

BenQ Cameras | 485 views | 6 helpful votes


Download all needed drivers from this link-- http://driverscollection.com/?file_id=19080

BenQ Cameras | 327 views | 1 helpful votes

Not finding what you are looking for?
BenQ DC C30 Digital Camera Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top BenQ Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

315 Answers

Are you a BenQ Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

BenQ Cameras

  • BenQ Cameras

Most Popular Question

benq lithiumion battery pa pack 3 7v

  • Cameras
Loading...