20 Most Recent
Pioneer AVH-P4400BH DVD Multimedia Receiver - Page 6 Questions & Answers
How can I fix my 900 watt Pioneer amp? The lpf switch has broken off and no sound comes out of the speakers. Is there any way I can fix it myself?
it appears to be a slide switch having been operated with a screw driver. The PCB has some damage, but if it is just a single sided board it can probably be fixed. The first thing is finding a switch.
I am guessing a PC Mount DPDT slide switch. You can find those in a lot of places. But they come in different physical sizes so you would have to apply the measurements to your search. That one appears to have a metal case with 4 corner tabs. You may or may not need that. Aliexpress may be a good place to look as Digikey or Mouser may cost more in shipping. If the circuit is also torn up, you will need to carefully repair that. The holes need to be cleaned out first to allow mounting. If you don't know how to solder, you will have to learn and practice otherwise you may make it unrepairable.
PIONEER PD-V10G How do you get to track 12 would it be 10> 2 if so that is not working goes to track 1
I'm Mike,
Sounds to me like a reading problem, laser lens is dirty and probably clouded by condensation leaving particles of fine dust. You cannot use Cd-cleaner or liquid, must buff it using a Dremel tool. Cd-cleaners go across the lens and actually scratch lens!
Must use sponge like material Radio Shack had on the end of
their Q-tip type swabs for cleaning VCR-tape heads, NOT reg. Q-tips!. You can find that type material in soft sponges sold at auto stores for cars or Wall Mart. Some CD-players require this because they are designed differently! Lens material also
may have coating on it which interacts with liquids.
Do not use liquid! Take super glue and glue a piece of the
sponge on the end of Dremel Tool shaft, trim it so it is size of lens.
Dremel tool spins high RPM creating air that blows off particles before touching lens. Also, it creates a uniform buff because you are coming down above lens, not across it!
I've rebuilt several of these machines and I assure you this will
help get you closer to fixing it. Most of the problems not reading a disc are related to the problem I mentioned. You will also need to use a fine 30 Wt. oil on the rails so it moves freely! Does not take much, you can use a Q-tip for this!
CAUTION! do not press down on lens with any weight behind it, gradually lower sponge while spinning till it just touches lens!
(first step!)You will need to open a disc drawer(Unit On)to position lens so you can buff it. You might have to use your finger on little white gear (by the rails)to get lens out far enough! When positioning disc drawer to be out of the way, have one hand on electric cord to unplug in time so you have clear path to lens, disc drawer must be out of way!
Good Luck! From Mike ---(The Tech!)
Do you'll sale part's for a pioneer stereo model RX-1220
Hi Michael Baldwin; here in Fixya, no parts of any kind are sold, we simply suggest solutions
In your case, I suggest you, search by model through the Internet, the part or pieces you need or contact an Official Pioneer Service
I hope you can find what you are looking for
Regards Franco Dosil
Hola Michael Baldwin; ac? en Fixya, no se venden piezas de ning?n tipo, simplemente sugerimos soluciones
En tu caso, te sugiero, busques por modelo a trav?s de Internet, la o las piezas que necesites o contactate con un Service Oficial de Pioneer
Espero puedas encontrar lo que buscas
Saludos Franco Dosil
Not finding what you are looking for?
