20 Most Recent
NAD T752 A/v Surround Sound Receiver - Page 4 Questions & Answers
Can i hook up a power amp to my Nad 7155 receiver and how
If the Nad has pre-amp out sockets that are currently connected to the power amp in the receiver. Then you can sever those link and put the pre-amp out into your Aragon inputs.
Otherwise I don't see how you can connect the amp.
9/7/2016 11:06:52 PM •
NAD Audio...
•
Answered
on Sep 07, 2016
How do I connect my NAD cd-player?
If you have a receiver with a digital rca input, buy a good quality coaxial cable and connect it from the digital output of you cd or dvd player. The digital/analogue converters inside the receiver are almost always better than the ones in the cd player. If running cd to a stereo receiver, just use a good quality pair of rca interconnect cables. Red is right, White is left.
6/16/2016 6:57:58 PM •
NAD Audio...
•
Answered
on Jun 16, 2016
Where can I get my NAD amp repaired in Johannesburg?
Engineers in Jburg? Sorry I've got no idea. I'm an engineer in SW London and repair amps etc from all over the country, if you can pack it very well and post it here I'll fix it for you. I'll give you a price gude first, what's the model and fault?
Dave.
2/23/2016 8:57:07 AM •
NAD Audio...
•
Answered
on Feb 23, 2016
My old NAD C350 AMP diode turns green when the amp is switched on, says one click, but the second click sound does not appear, like in the good old days. What to do?
take it to the repair shop,,
unless you're an electronics tech,,, if so, reply & i'll take you further
10/6/2015 5:08:46 PM •
NAD Audio...
•
Answered
on Oct 06, 2015
I have a nad 3130 amplifier which has been in storage for sometime. I've plugged it in and I have no power to the amp.
If the fuses are good....do this.....
1...unplug the amp from the wall AND KEEP IT UNPLUGGED !!!
2 Turn the power switch on ( again , the amp is UNPLUGGED from the wall )
3 with an ohm meter or a multimeter set on ohms., measure the ohms across the ac cord that plugs into the wall....in other words...take one meter lead and touch it to only one " blade" that plugs into the wall and keep it touching the " blade".....while you are holding it there, touch the other meter lead to the other " blade " that plugs into the wall.....you should get a very low ohm reading ( 2-50 ohms )......if it is over that number, your transformer or your switch is open ( toast ). hopefully it is the switch as transformers are un-available......good luck, be safe, and if you arent sure....ask before doing something silly.....Rob
5/30/2015 5:04:41 AM •
NAD Audio...
•
Answered
on May 30, 2015
How do i connect nad av 316 with an lg tv ?
The NAD from what I've seen of the back of it has no digital audio inputs. So unless the TV has standard audio out RCA type connectors you will struggle. If it has a scart socket you can buy a scrat to phono converter. An image will be posted with this message.
However the NAD has only Dolby Surround. It has not got a Dolby Digital decoder so it can never produce the Dolby Digital sound used on DVD/Blue Ray discs or that found on HD TV broadcasts.
As you didn't say which TV model number, I can't say anything more except if it is an HD model and has digital sound connections you really need to upgrade your Receiver to one that has the latest features.
4/27/2015 7:06:36 PM •
NAD Audio...
•
Answered
on Apr 27, 2015
Hi ihave nad 304 it keeps blowing 5 amp fuses
Most likely caused by a shorted output transistors on at least one channel + possibly some other components they took with them... but maybe you are lucky and you have a shorted power capacitor or something.
3/23/2015 5:38:34 AM •
NAD Audio...
•
Answered
on Mar 23, 2015
Not finding what you are looking for?