Top 20 MSI K8N Neo4-F Motherboard Questions & Answers

There is neither Windows Vista or Windows 7 Drivers for the MSI K8N Neo4-F. It is not compatable, http://us.msi.com/support/mb/K8N_Neo4F_PCB_1.0.html#support-test

You need to use a computer with Internet access, then go to the MSI WEB site to download the BIOS file for you model motherboard and then copy this BIOS file to an USB memory stick.You and then insert this USB memory stick into your MSI computer and boot up the computer.

ram or corrosive processor pin. if you have the guts to clean it then do it

Hello you can download the manual from here:http://www.msi.com/service/search/?kw=K8N%20Neo4&type=productBy selecting the right maniboard.Seach also by the ms xxxx number on the mainboard to get the right manual.When you find your mainboard click on download and select manual and download the pdf file.Unzip the file after download.You need adobe reader to read the content.Good luck

If this is a desktop make sure you plug the speakers into the correct port and that the speakers are turned on and the volume is up. Also check the Audio and Sound Properties (Volume Control) to make sure the volume is turned up and not on mute.Try downloading and installing the VLC Player, it comes with drivers and codec. I've seen it solve many issues with sound.

Try using VLC as your player. Go to www.google.com and in the search box type "download vlc" (without the quotes). Look for the Video Lan download from site www.videolan.org/vlc Download and install it. It downloads and installs in 3 minutes or so. It's a very fast player, smooth and it can play just about any type of dvd formats and media. It's totally FREE. Also if this is a desktop, you can always purchase a pci sound card that goes into one of the available pci slots for less than $15.

The manual can be downloaded here http://www.msi.com/product/mb/K8N-Neo4-F--PCB-1-0-.html#/?div=Manual Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

HI. This issue with the NB fan will be a direct result of fan failure. The actual fan motor assembly may be shorted or disabled. This fan should be replaced asap(make sure to check the fan connector for proper connection before replacing the NB fan). Now, concerning your halted boot screen; This will be a direct result of a failed or corrupted OS(Operating System). I would recommend to initiate a system restore by inserting the restoration CD/DVDROM that came with the CPU system, when purchased or delivered. This will totally reinstall the OS and correct all corrupted files that have been affected by this unfortunate virus/worm attack.Due to the fact that your system will not boot up, you will need to insert the restoration CD/DVDROM into its respective ROM device and shutdown the unit for five minutes. Once the shutdown has occurred, simply, restart your unit and follow the restoration instructions on screen during the hard boot. It may be necessary to self initiate the restoration by booting from the actual ROM device, via f11 or f9 command upon boot screen.

Hi, you can download a manual here:

http://www.msi.com/product/mb/K8N-Neo4-F--PCB-1-0-.html#?div=Manual

Here you also find driveres for download.

Here is a youtube video that shows how:

http://www.youtube.com/watch?v=yhKXhu1LFiA

Select first the sata configure the hard drive with windows on
has to be the first one it boots from.

It have probably been added to second when you have reset the bios
And it will not boot.

Hope this will help you.

This is the Motherboard Manual for the MSI K8N Neo4 series of motherboards. It is in PDF file form,

http://static.tigerdirect.com/pdf/MSI-K8N-Neo4-Series-Manual.pdf

If the direct link above doesn't work, copy the above URL, then paste it in your address bar. Press the Enter key.

It may take up to 30 seconds before you see the first page, and additional time may be required to fully download. This is a temporary download. There is a way to save it to your computer.
(This way you can burn a copy to CD disk for safekeeping, and remove it from the computer to save harddrive space)

If you do not know how, and wish to, please post in a Comment.

At the top of the PDF file is the page number box. It is to the right of the blue down arrow.
Go to Page 39.
There you will see that there is a Clear CMOS button.
SW1

For additional questions please post in a Comment.
Regards,
joecoolvette

http://www.msi.com/service/download/manual-4370.html
Select US, or chinese if you'd like.

If this answer helped, please rate it appropriately.

Hello download a manual here at MSI:http://www.msi.com/product/mb/K9N-SLI-V2.html#/?div=ManualYou need to unzip the file when downloaded.I guess the bios upgrade set the usb function offYou have to enter the bios and set it on again.Look in the manual how you do that.You need a PDF reader to read content.Good luck

Motherboards can look a bit daunting at first, but they're not really. You question is quite broad, so I'm going to refer you to the manual. First, there is both a version 1 and version 3 motherboard. You'll need to determine which you've got to download the correct manual. Look closely at the board between the YELLOW and WHITE bus slots. You should see some printed text. "MS-7125 V1" or "MS-7125 V3". The V1 or V3 tells you which version you have - either 1 or 3. Download the appropriate manual by clicking the version link: "V1" or "V3"

Unzip and double click the .pdf file inside to open it in Adobe Reader. The manual will display on the screen. Read or print it in its entirety. Pay particular attention to the Hardware Setup chapter (chapter 2 in the V1 manual) and any other part you're not sure about. Rather than me typing all of it in here, you should print out the section (if you haven't printed out the whole manual) and follow it. It goes step by step - one at a time. Skip over parts that are already done, and go to the next.

If you have specific questions about a particular step - ask a question here and I'll answer as best I can for you.

Please rate this reply - thanks!

try to reformat your hard drive...



akuma_ryu21

dont forget to rate!!

Hi, I understand that you have a problem of noise from your CPU fan. Why not just have look at the weblink below and then, order for the fan?

http://forum-en.msi.com/index.php?topic=94426.0

I hope, this will give some idea as well as permanant solution.

Thanks,
Shiva

With reference of your motherboard posted picture, opposite pci slot you will find a ten pin male slot where you can place your hdd, power, reset jack connection of your cabinet

move the sata connection for your bootable HDD to another port like 3 or 4 and the bios will detect then run bios setup to boot from the sata 3 or 4 and it works like normal, must be a bug in sata 1 and 2. had same issue trying to install win7 x64. Win 7 refuses to detect sata DVD drive, moved it on the MB and it installed fine.

HI. If you are a gamer/producer type. I would go with the Western Digital Veloci Raptor. You will not be disappointed with that monster. Now; If you are a moderate user that dose not crave for power and speed, and want a power saver/green drive, I would go with a Western Digital WD10EARS Caviar Green Hard Drive - 1TB. The green drive will save power and run quite well.


Veloci Raptor

Western Digital WD10EARS Caviar Green Hard Drive - 1TB.

My guess is that the computer (or the power-supply) is overheating, and automatically shuts-down to prevent significant damage.

Check that all the fans inside the computer are running.

Take a can of compressed-air, and give your computer a "blow-job", since accumulated dust acts as "insulation" to prevent heat dissipation.

check the ram for fult clean it s golden connectors using eraser do not clean it and insert it look wether the monitor is working check the diplay connector to your cpu if the problem still presits check the disply section on the motherboard if its add on card replace it if you still have problem contact a chiplevel engineer he will repace the display ic also check the drivers wether isntalled properly